LS300WR
True Hard Rock Pumping in a Smaller Package
- Concrete piston face pressure of 800 PSI (55 Bar)
- Concrete cylinder diameter is 6 inches (152 mm) with 24-inch stroke (610 mm)
- Horizonal pumping distance of 800 feet (243 meters), vertical is 200 feet (61 meters)
- Powered by a 67-hp (50kW) Deutz TD2009 turbo diesel
- Designed for aggregate sized up to 1-1/2 inches (38 mm)
- True Reverse allows stroke change during any point in the pumping cycle
- Hard faced wear components for longer life
- Variable volume output of 30 cubic yards (23 cubic meters) per hour
- Ideal for use with shotcrete, masonry block fill, slabs, footings, lightweight, & blend mixes
- Innovative DCP (Digital Control Panel) solid state electronic control box with full diagnostic & performance monitoring
- Wireless radio remote included - has a range of 1000 feet (300 meters)
- Optional air or electric vibrators for hopper screen
| Hopper Height | 43 in | 1092 mm |
| Hopper Capacity | 10 ft | 283 L |
| Pump Outlet | 0.5 in | 127 mm |
| Concrete Cylinders | 6 x 24 in | 152 x 610 mm |
| Hydraulic Cylinders | 3 x 24 in | 76 x 610 mm |
| Hydraulic Oil Capacity | 33 gal | 125 L |
| Fuel Tank Capacity | 16 gal | 61 L |
| Brake Type | Hydraulic Surge | |
| Pumping Rate per Hour |
0 - 30 yd | 0 - 23 m |
| Vertical Pumping Height | 200 ft | 61 m |
| Horizontal Pumping Distance | 800 ft | 243 m |
| Max. Concrete Pressure | 800 psi | 55 bar |
| Max. Aggregate Size | 1.5 in | 38 mm |
| Note: These figures will vary due to concrete mix design, line size, and job site conditions. | ||
| Overall Length | 158 in | 4013 mm |
| Overall Width | 65 in | 1651 mm |
| Overall Height | 66 in | 1676 mm |
| Operating Weight | 3750 lb | 1701 kg |
| Standard Features | Radio Remote Control DCP - Digital Control Panel w/Diagnostic Readout Hard Faced Wear Components |
|
| Optional Accessories | Hopper Screen Vibrator | |
Notice: Features and equipment specifications are subject to change without notice.
