Green Concrete

Diamond Blades

Multiquip's Sanders line of products covers the entire spectrum of diamond tools, producing world-class tools and equipment to facilitate the requirements of an ever growing industry.

Series	Relative Diamond Content
11,000
10,000
9,000
8,000
7,000
6,000
5,000

Within the United States there are thousands of geological aggregate classifications, and knowing the aggregate within the job location can be the difference between success and failure. Green concrete condition is defined as concrete that is between 16 to 72 hours old under normal conditions. Timing and correct bond selection will ensure smooth, clean joints in all aggregates.

Based on our expert experience with the listed aggregates, we recommend the following specification and series:

Aggregate Type		Recommended Specification
Critically Hard		GC7011
Hard		GC7210
Medium-Hard		GC7511
Medium-Soft		GC7709
Soft		GC79411

Standard Blade Sizes
Dia. x Width
in	mm	in	mm
14 x 0.125	356 x 3.2	18 x 0.125	457 x 3.2
14 x 0.140	356 x 3.6	18 x 0.140	457 x 3.6
14 x 0.155	356 x 3.9	18 x 0.155	457 x 3.9
14 x 0.165	356 x 4.2	18 x 0.165	457 x 4.2
14 x 0.187	356 x 4.7	18 x 0.187	457 x 4.7
14 x 0.220	356 x 5.6	18 x 0.220	457 x 5.6
14 x 0.250	356 x 6.4	18 x 0.250	457 x 6.4
14 x 0.375	356 x 9.5	20 x 0.125	508 x 3.2
16 x 0.125	406 x 3.2	20 x 0.140	508 x 3.6
16 x 0.140	406 x 3.6	20 x 0.155	508 x 3.9
16 x 0.155	406 x 3.9	20 x 0.165	508 x 4.2
16 x 0.165	406 x 4.2	20 x 0.187	508 x 4.7
16 x 0.187	406 x 4.7	20 x 0.220	508 x 5.6
16 x 0.220	406 x 5.6	20 x 0.250	508 x 6.4
16 x 0.250	406 x 6.4

Blade Segment Height
in	mm
.450 and .500	11.4 and 12.7

Notice: Features and equipment specifications are subject to change without notice.