|
|
|
|
The HBC-19 uses an electro-hydraulic design to handle virtually any rebar cutting job, from slabs and masonry walls to large buildings and bridges.
- Cuts rebar up to 0.75-inches (20 mm) thick in 3 seconds
- 115V, 60 Hz single-phase motor
- Hydrualic pump features magnetic particle filtering for maximum life
- Heat-treated steel blades can be rotated to maximize cutting life
- Weighing only 27 pounds (12 kg) the unit is easily moved around the jobsite
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
| Rated Power |
9 A |
| Max. Cutting Speed |
3 sec |
| Electric Motor |
115 Volt, 60 Hz, 1Ø AC |
|
| Overall Length |
15.3 in |
380 mm |
| Overall Width |
4.4 in |
110 mm |
| Overall Height |
8.8 in |
230 mm |
| Shipping Dimensions |
27 x 0 x 0 in
12.2 x 0 x 0 mm
|
| Operating Weight |
27 lb |
12.2 kg |
| Shipping Weight |
0 lb |
0 kg |
|
| Max. Bar Size |
No. 6 |
| Max. Bar Diameter |
3/4 in |
19 mm |
| Max. Bar Size |
No. 6 cu. ft |
| Max. Bar Diameter |
3/4 in |
19 mm |
| Max. Bar Size |
No. 5 cu. ft |
| Max. Bar Diameter |
5/8 in |
16 mm |
|
| Standard Accessories |
3 Hex Wrenches
3 Hydraulic Oil Refill Kits
Wood Carrying Box |
|
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
