|
|
|
|
Multiquip's welder/generators are engineered with a new permanent magnet alternator plus features typically found only on much larger welders.
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding.
- Ideal for job site and remote-area service applications
- Produces 50-180 amps for DC welding, 3kW output to power AC tools.
- Operator can draw AC power and weld simultaneously
- Honda GX340 gasoline engine
- Permanent magnet alternator-significantly reduces overall weight compared to other welders in its class
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
|
|
| DC Voltage |
CC: 26.8 V |
| DC Current |
CC: 180A |
| Current Range |
50-180 A |
Max Duty Cycle
w/ Full Amps Availible |
50% @180 A |
| Welding Processes |
SMAW
FCAW
GTAW
ACAC |
| Fuel Tank Capacity |
3.7 gal |
16.8 L |
Fuel Consumption
at Rated Load |
0.93 gph |
|
| Overall Length |
27.5 in |
69.85 cm |
| Overall Width |
22 in |
55.88 cm |
| Overall Height |
23.75 in |
60.3 cm |
Shipping Dimensions
|
28.5 x 23 x 28 in
72.4 x 58.4 x 71.1 cm |
| Operating Weight |
225 lb |
102.3 kg |
| Shipping Weight |
239 lb |
108.6 kg |
|
AC Power Output
(Single Phase) |
3 kW |
| Cycle |
60 Hz |
| Voltage |
120 V |
| Amperage |
25 A |
| Voltage Regulation |
3 % |
| Receptacles |
NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A |
|
| AC/DC Simultaneous Use |
Standard |
| Lifting Bale |
Standard |
| Automatic Safety Shutdown |
Oil Level |
| Idle Switch |
Standard |
| Optional Wheel Kit |
UWK |
|
| Engine Make/Model |
Honda GX-340 |
| Start Method |
Electric/Recoil |
| Engine Power |
9.5 HP |
7.1 kW |
| Engine RPM |
3600 |
| Fuel Type |
Gasoline |
|
|
Notice: Features and equipment specifications are subject to change without notice.
