|
|
|
|
This CC (constant current), CV (constant voltage) welder delivers up to 500 amps of DC welding output. As a generator it provides up to 3kW of 120/240 volt AC power. This unit can also be simultaneously used as a welder and generator.
- Standard lifting bale, external oil and fuel drains
- Showcases a clean burning Tier 4 EPA-approved Kubota diesel engine
- CC and CV welding capability
- Electric-start, gasoline-powered
- Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
|
|
| DC Voltage |
CC: 38 V |
CV: 16-40 V |
| DC Current |
CC: 500 A |
CV: 500 A |
| Current Range |
40-500 A |
Max Duty Cycle
w/ Full Amps Availible |
100% @350 A |
| Welding Processes |
SMAW
FCAW
GMAW
GTAW
ACAC |
| Fuel Tank Capacity |
12 gal |
0 L |
Fuel Consumption
at Rated Load |
1.3 gph |
|
| Overall Length |
53 in |
134.62 cm |
| Overall Width |
32 in |
81.28 cm |
| Overall Height |
36 in |
91.44 cm |
| Operating Weight |
1069 lb |
485 kg |
|
AC Power Output
(Single Phase) |
3 kW |
| Cycle |
50/60 Hz |
| Voltage |
120 V |
| Amperage |
25 A |
| Voltage Regulation |
7 % |
| Receptacles |
NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A |
|
| AC/DC Simultaneous Use |
Standard |
| Lifting Bale |
Standard |
| External Drains |
Standard |
| Automatic Safety Shutdown |
Oil Switch
Water Temperature
Thermal Switch DC
Low Battery Charge |
| Idle Switch |
Standard |
| Optional Trailer |
TRLR-MP, TRLR-MPXF** |
**TRLR-MPXF has a built in 28 gal. fuel cell
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
