|
|
|
|
A reliable 6kW generator with electric start that is great for job sites or service trucks. Powerful enough to run basic power tools as well as air compressors, submersible pumps and worm-drive circular saws.
- Twin duplex receptacles and three twist-lock receptacles for job site versatility
- 100% copper windings for maximum conductivity
- Alternator design eliminates maintenance by removing brushes and slip rings
- Heavy-duty 1-inch (25 mm) steel pipe frame and shock mounts protect the generator
- Includes folding lifting bale as standard equipment
- Powered by an Honda GX340 engine with low-oil shutdown and automatic idle control
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
|
|
| Alternator Design |
Brushless |
| Frequency |
60 hz |
| Phase |
Single Phase |
| Voltage |
120/240 V |
| Sound level at 30 ft |
76 dBA |
| Fuel Tank Capacity |
5 gal |
19 L |
|
| Overall Length |
26.5 in |
67.31 cm |
| Overall Width |
22.25 in |
56.515 cm |
| Overall Height |
22.5 in |
57.15 cm |
Shipping Dimensions
|
26.5 x 22.25 x 22.5 in
66 x 61 x 67 cm |
| Operating Weight |
203 lb |
92.1 kg |
| Shipping Weight |
219 lb |
100 kg |
|
|
Maximum |
Continuous |
| Watts |
6000 W |
5000 W |
| Amps at 120V |
50 A |
41.6 A |
| Amps at 240V |
25 A |
20.8 A |
|
| Main Circuit Breaker |
21 A |
| Number of Poles |
2 |
| 1 Receptacle of Each: |
L5-20R 125V T-Lock 20A
L5-30R 125V T-Lock 30A
L14-30R 125/250V T-Lock 30A
|
| 2 Receptacle of Each: |
5-20R 125V GFCI 20A
|
|
| This model is equiped with a Full Power Switch |
| Optional Wheel Kit |
UWK |
|
| Engine Make/Model |
Honda GX-340 |
| Start Method |
Electric/Recoil |
| Engine Power |
9.5 HP |
7.1 kW |
| Engine RPM |
3600 |
| Fuel Type |
Gasoline |
|
|
Notice: Features and equipment specifications are subject to change without notice.
