Archived Products

Archived Products Series Page

AR12

AR12

32.3 inch (820mm) drum width, Yanmar 3TVN76
The MQ/Rammax ride-on rollers excel in asphalt compaction as well as sub-layer granular and mixed soil projects. World-renowned for quality workmanship and performance, these units feature unique offset drums for excellent clearance against walls and curbs while increasing the working width of the drums.
 
  • Maximum impact force is 3,597 pounds (16 kN)
  • The lightest, most compact roller in the AR Series
  • Drum width of 32.3 inches (820 mm)
  • Vibration-isolated driver platform for improved comfort
  • Tight outside/inside turning radius of 118/85.5 inches (2,990/2,170 mm)
 
 
Notice: Features and equipment specifications are subject to change without notice.
 


BC25

BC25

Rebar Cutter, Bench Type, 1" Bar Capacity, 115V
This rebar cutter is at home on the job or in a high-production workshop environment.
 
  • Automatic-cycle feature extends and retracts cutting blades at regular intervals for easy material handling
  • Use it as a bench mounted unit in a shop or take it to the site for on the spot bar cutting
  • Slices rebar up to 1-inch thick (25 mm) in 9 seconds
  • Electro-mechanical design delivers years of dependable performance
 
 
Unit Specifications
Rated Power 12 A
Max. Cutting Speed 9 sec
Electric Motor 115 Volt, 60 Hz, 1Ø AC
Dimensions & Weights
Overall Length 23.8 in 604 mm
Overall Width 9.8 in 250 mm
Overall Height 9.5 in 240 mm
Shipping Dimensions 129 x 0 x 0 in
58 x 0 x 0 mm
Operating Weight 129 lb 58 kg
Shipping Weight 0 lb 0 kg
Cutting Capacity Grade 40
Max. Bar Size No. 8
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 50
Max. Bar Size No. 8 cu. ft
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 60
Max. Bar Size No. 7 cu. ft
Max. Bar Diameter 7/8 in 22 mm
Notice: Features and equipment specifications are subject to change without notice.
 


BC25SA

BC25SA

Rebar Cutter, Bench Type, 1" Bar Capacity, 230V
This rebar cutter is at home on the job or in a high-production workshop environment.
 
  • A powerful 230-Volt, 50 Hz electric motor makes it ideal for virutally all industrial applications
  • Can be bench mounted at the shop or used on site from the back of a pick-up truck
  • Slices rebar up to 1-inch thick (25 mm) in 9 seconds
  • Parts are all machined to tight tolerances for optimum effectiveness
 
 
Unit Specifications
Rated Power 12 A
Max. Cutting Speed 9 sec
Electric Motor 230 Volt, 50 Hz, 1Ø AC
Dimensions & Weights
Overall Length 23.8 in 604 mm
Overall Width 9.8 in 250 mm
Overall Height 9.5 in 240 mm
Shipping Dimensions 129 x 0 x 0 in
58 x 0 x 0 mm
Operating Weight 129 lb 58 kg
Shipping Weight 0 lb 0 kg
Cutting Capacity Grade 40
Max. Bar Size No. 8
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 50
Max. Bar Size No. 8 cu. ft
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 60
Max. Bar Size No. 7 cu. ft
Max. Bar Diameter 7/8 in 22 mm
Notice: Features and equipment specifications are subject to change without notice.
 


C30HDNI

C30HDNI

Nissan A15 51-HP gasoline engine
The C30HDNI concrete pump offers improved engine performance with excellent fuel efficiency in a quiet, smooth pumping package.
 
  • Pumps up to 25 cubic yards (19 cubic meters) per hour
  • Maximum aggregate size of 1/2-inch minus (12 mm)
  • 51-hp (38kW) fuel-injected Nissan gasoline engine ensures quiet, efficient performance
  • 3-function radio remote with full volume control and 1,000-foot (300 meters) operating range (Optional).  A 2-function 125-foot (37.5 meters) hardwired remote is standard
  • Fully-enlclosed piston lubrication box and central lubrication grease station
  • Standard equipment includes a 3-inch (75 mm) x 90 degree pipe elbow, 3 x 2 x 28-inch reducer, and two 3-inch couplings (all raised ends)
  • Excellent choice for small-aggregate concrete pumping, masonry grout, shotcrete, pressure grouting, and more
 
 
Unit Specifications
Pump Type Reciprocating piston
Hopper Capacity 6 ft³ 0.17 m³
Material Hose Diameter 3 in 76 mm
Pumping Specifications
Volume Output
per Hour*		 25 yd³ 19 m³
Vertical Pumping Height* 150 ft 46 m
Horizontal Pumping Distance* 500 ft 152 m
Concrete Piston Face Pressure 500
Max. Aggregate Size 0.5 in 12 mm
* These figures will vary due to concrete mix design, line size, and job site conditions.
Dimensions & Weights
Overall Length 144 in 3658 mm
Overall Width 59 in 1499 mm
Overall Height 65 in 1651 mm
Operating Weight 2831 lb 1284 kg
All weights are approximate. Exact weight is dependant upon power source used.
Notice: Features and equipment specifications are subject to change without notice.
 


DA7000SSW

DA7000SSW

7kW, 120/240V, Kubota Diesel Z482, Electric Start
The WhisperWatt series of diesel-powered generators has long been synonymous with superior performance and sound attenuation. As more jobsites and municipalities specify maximum sound levels, this generator is now the clear choice.
 
  • Sound-attenuated package keeps noise level to only 65.7dBA at 23 feet (6.9 meters)
  • Brushless alternator design eliminates maintenance parts
  • External drains for oil and fluids simplify maintenance
  • Generator can be mounted on an optional wheel kit, trailer or light tower
 
 
Unit Specifications
Alternator Design Brushless
Frequency 60 hz
Phase Single Phase
Voltage 120/240 V
Sound level at 30 ft 65.7 dBA
Fuel Tank Capacity 12.5 gal 9.3 L
Dimensions & Weights
Overall Length 46 in 116.84 cm
Overall Width 26 in 66.04 cm
Overall Height 31.5 in 80.01 cm
Shipping Dimensions
 46.5 x 27.5 x 36 in
118 x 48 x 52 cm
Operating Weight 571 lb 259 kg
Shipping Weight 0 lb kg
Power Generation
Maximum Continuous
Watts 7000 W 6000 W
Amps at 120V 58.3 A 50 A
Amps at 240V 29.2 A 25 A
Receptacles & Circuit Breakers
Main Circuit Breaker 25 A
Number of Poles 2
1 Receptacle of Each: L5-30R 125V T-Lock 30A
L6-20R 250V T-Lock 20A
L14-30R 125/250V T-Lock 30A
CS-6369 125/250VAC 50A
2 Receptacle of Each: 5-20R 125V GFCI 20A
Notice: Features and equipment specifications are subject to change without notice.
 


DAW500ATMP

DAW500ATMP

500 amp Welder, 3KW, 120/240V Gen
This CC (constant current), CV (constant voltage) welder delivers up to 500 amps of DC welding output. As a generator it provides up to 3kW of 120/240 volt AC power. Additionally, this unit can be simultaneously used as a welder and generator.
 
  • CC and CV welding capability
  • Electric-start, gasoline-powered
  • Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • External oil and fuel drains, and several automatic safety shutdowns
  • Kubota D-1803 engine, with 34.5-hp, drives the unit
  • Trailer TRLRTMP mounted
 
 
Unit Specifications
DC Voltage CC: 38 V CV: 16-40 V
DC Current CC: 500 A CV: 500 A
Current Range 40-500 A
Max Duty Cycle
w/ Full Amps Availible		 100% @350 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 12 gal 0 L
Fuel Consumption
at Rated Load		 1.3 gph
Dimensions & Weights
Overall Length 53 in 134.62 cm
Overall Width 32 in 81.28 cm
Overall Height 36 in 91.44 cm
Operating Weight 1069 lb 485 kg
Generatr Specifications
AC Power Output
(Single Phase)		 3 kW
Cycle 50/60 Hz
Voltage 120 V
Amperage 25 A
Voltage Regulation 7 %
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.
 


GB114BC

GB114BC

4-wheel cart; 1000-watt metal-halide bulb
The GloBug GB114BC light tower is designed to provide glare-free lighting for a wide range of applications. Self-inflating balloons are easy to install or change. Inflates in less than 20 seconds.
 
  • Balloon is made of a parachute-type material that resists heat and tearing
  • 360 degree glare-free illumination with standard balloon (BAL-120)
  • Optional balloons include drum style and reflector options; custom balloons also available
  • Self-inflating balloons are easy to install and change; inflate in less than 20 seconds
  • Four-stage mast extends to 16.5 feet (5 meters)
  • Cart features parking brake, steering handle and outriggers, and pneumatic tires
  • Accepts most models of generators (not included)
  • Protective canvas stores ballon while not in use
 
 
Notice: Features and equipment specifications are subject to change without notice.
 


HBC19SA

HBC19SA

Rebar Cutter, Handheld, 3/4" Bar Capacity, 230V
The HBC-19SA uses an electro-hydraulic design to handle virtually any rebar cutting job, from slabs and masonry walls to large buildings and bridges.
 
  • Cuts rebar up to 0.75-inches (20 mm) thick in 3 seconds
  • 230V, 50 Hz single-phase motor
  • Hydrualic pump features magnetic particle filtering for maximum life
  • Heat treated steel blades can be rotated to maximize cutting life
  • Weighing only 27 pounds (12 kg) the unit is easily moved around the job
 
 
Unit Specifications
Rated Power 9 A
Max. Cutting Speed 3 sec
Electric Motor 230 Volt, 50 Hz, 1Ø AC
Dimensions & Weights
Overall Length 15.3 in 380 mm
Overall Width 4.4 in 110 mm
Overall Height 8.8 in 230 mm
Shipping Dimensions 27 x 0 x 0 in
12.2 x 0 x 0 mm
Operating Weight 27 lb 12.2 kg
Shipping Weight 0 lb 0 kg
Cutting Capacity Grade 40
Max. Bar Size No. 6
Max. Bar Diameter 3/4 in 19 mm
Cutting Capacity Grade 50
Max. Bar Size No. 6 cu. ft
Max. Bar Diameter 3/4 in 19 mm
Cutting Capacity Grade 60
Max. Bar Size No. 5 cu. ft
Max. Bar Diameter 5/8 in 16 mm
Notice: Features and equipment specifications are subject to change without notice.
 


HBC25

HBC25

Rebar Cutter, Handheld, 1" Bar Capacity, 115V
The HBC25 cuts rebar faster and easier than with manual cutters, torches and saws.
 
  • Slices rebar up to 1 inch (25 mm) in 3 seconds
  • Weighing only 48 pounds (12 kg) the unit is easily moved around the job
  • Powered by a 115V electric motor with easily accessible brushes
  • Heat treated steel blades can be rotated to maximize cutting life
  • Hydraulic pump features magnetic particle filtering for maximum life
 
 
Unit Specifications
Rated Power 12 A
Max. Cutting Speed 4.5 sec
Electric Motor 115 Volt, 60 Hz, 1Ø AC
Dimensions & Weights
Overall Length 18.3 in 464 mm
Overall Width 5.9 in 150 mm
Overall Height 9.4 in 240 mm
Shipping Dimensions 48 x 0 x 0 in
22 x 0 x 0 mm
Operating Weight 48 lb 22 kg
Shipping Weight 0 lb 0 kg
Cutting Capacity Grade 40
Max. Bar Size No. 8
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 50
Max. Bar Size No. 8 cu. ft
Max. Bar Diameter 1 in 25 mm
Cutting Capacity Grade 60
Max. Bar Size No. 7 cu. ft
Max. Bar Diameter 7/8 in 22 mm
Notice: Features and equipment specifications are subject to change without notice.
 


HBC25SA

HBC25SA

Rebar Cutter, Handheld, 1" Bar Capacity, 230V
The HBC25SA cuts rebar faster and easier than with manual cutters, torches and saws.
 
  • Slices rebar up to 1 inch (25 mm) in 3 seconds
  • Weighing only 48 pounds (12 kg) the unit is easily moved around the job
  • Powered by a 230-Volt 50 Hz motor with easily accessible brushes
  • Heat treated steel blades can be rotated to maximize cutting life
  • Hydraulic pump features magnetic particle filtering for maximum life
    •  
     
    Unit Specifications
    Rated Power 12 A
    Max. Cutting Speed 4.5 sec
    Electric Motor 230 Volt, 50 Hz, 1Ø AC
    Dimensions & Weights
    Overall Length 18.3 in 464 mm
    Overall Width 5.9 in 150 mm
    Overall Height 9.4 in 240 mm
    Shipping Dimensions 48 x 0 x 0 in
    22 x 0 x 0 mm
    Operating Weight 48 lb 22 kg
    Shipping Weight 0 lb 0 kg
    Cutting Capacity Grade 40
    Max. Bar Size No. 8
    Max. Bar Diameter 1 in 25 mm
    Cutting Capacity Grade 50
    Max. Bar Size No. 8 cu. ft
    Max. Bar Diameter 1 in 25 mm
    Cutting Capacity Grade 60
    Max. Bar Size No. 7 cu. ft
    Max. Bar Diameter 7/8 in 22 mm
    Notice: Features and equipment specifications are subject to change without notice.
     


    HDA48411H

    HDA48411H

    4-blade, 48", Honda GX340
    Features a heavy-duty gearbox and spider assembly along with high-horsepower Honda engines.
     
    • Heavy-Duty Walk-behind trowel gearbox
    • Honda GX340 offers top rotor speed of 140-RPM.
    • Supports optional Quick-Pitch Handle for rapid blade changing
     
     
    Unit Specifications
    Clutch Type Centrifugal
    No. of Blades 4
    Ring Diameter 48 in 1219.2 mm
    Rotor Speed 65-140 RPM
    Handle Options
    Dimensions & Weights
    Operating Weight** 295 lb 134 kg
    Shipping Weight** 355 lb 161 kg
    * Approximate dimensions include Standard Handle (Sold seperately).
    **Weight does not include handle.
    Notice: Features and equipment specifications are subject to change without notice.
     


    HHN34TVDTCSL4

    HHN34TVDTCSL4

    NOL twin 48" 34-hp Vanguard Turbo Diesel
    The Whiteman HHN34TVDTCSL4 features the world's most reliable gearbox, patented steering assist and a powerful 3-cylinder turbo diesel engine.
     
    • Patented Helical gearbox achives 98% efficiency
    • A powerful 34-hp Vanguard turbo diesel engine
    • Variable speed clutch responds to the work load by automaticaly shifting up or down.
    • Four blades per rotor and a path width of 91 inches (2.31 meters)
    • Patented TwinPitch design allows for simultaneous rotor pitch control

     

     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPHA3648H

    HPHA3648H

    4-blade, 36", 8HP Honda; High Speed
    MQ/Whiteman's all-purpose walk-behind trowels deliver the flattest finishes in the industry, year after year.
     
    • A four-blade Honda-powered trowel
    • Rotor speed of 75-155 rpm
    • A 36-inch (915 mm) ring diameter
    • Standard handle designed with both ergonomics and performance
    • Patented Quick-Pitch handle is optional
     
     
    Unit Specifications
    Clutch Type Centrifugal
    No. of Blades 4
    Ring Diameter 36 in 914.4 mm
    Rotor Speed 75-155 RPM
    Handle Options
    Dimensions & Weights
    Operating Weight** 171 lb 77 kg
    Shipping Weight** 211 lb 96 kg
    * Approximate dimensions include Standard Handle (Sold seperately).
    **Weight does not include handle.
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPHA3648HM

    HPHA3648HM

    4-blade, 36", 8HP Honda; Manual Clutch; Low Speed
    MQ/Whiteman's HPHA Series walk-behind power trowels are 4-blade models with impressive rotor speeds and powerful Honda engines to meet the needs of concrete contractors.
     
    • Extra horsepower, rotor speed of 75-155 rpm
    • Fueled by an 11-hp Honda gasoline engine
    • A 46-inch (1.17 meters) ring diameter
    • Heavy-duty gearbox handles the machine's extra weight

     

     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPHA46411H

    HPHA46411H

    4-blade, 46", 11HP Honda; High Speed
    The walk-behind power trowel gives contractors the flattest finishes in the industry and it comes with a host of impressive standard and optional features.
     
    • Extra horsepower, rotor speed of 75-155 rpm
    • Driven by an 11-hp Honda gasoline engine
    • A 46-inch (1.17 meters) ring diameter
    • Heavy-duty gearbox handles the machine's extra weight
    • Weighs 245 pounds (113 kg)
     
     
    Unit Specifications
    Clutch Type Centrifugal
    No. of Blades 4
    Ring Diameter 46 in 1168.4 mm
    Rotor Speed 50-108 RPM
    Handle Options
    Dimensions & Weights
    Operating Weight** 245 lb 111 kg
    Shipping Weight** 310 lb 141 kg
    * Approximate dimensions include Standard Handle (Sold seperately).
    **Weight does not include handle.
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPHA46411HM

    HPHA46411HM

    4-blade, 46", 11HP Honda; Manual Clutch; High Speed
    MQ/Whiteman's HPHA Series walk-behind power trowels are 4-blade models with impressive rotor speeds and powerful Honda engines to meet the needs of concrete contractors.
     
    • Gearbox has 50% greater oil capacity
    • A 46-inch (1.17 meters) ring diameter
    • Driven by an 11-hp Honda engine
    • Large tapered bearings minimize friction, reduce operating temperature
    • Rotor speed of 60-125 rpm
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPLA3648H

    HPLA3648H

    4-blade, 36", 8HP Honda; Low Speed
    This 36-inch (915 mm) ring diamter walk-behind trowel gives contractors the extra torque they need for pan floating jobs.
     
    • Rotor speed of 60-125 rpm
    • Trowel weighs only 171 pounds (77 kg)
    • Ring diameter of 36 inches (915 mm)
    • Driven by an 8-hp Honda gasoline engine
     
     
    Unit Specifications
    Clutch Type Centrifugal
    No. of Blades 4
    Ring Diameter 36 in 914.4 mm
    Rotor Speed 55-118 RPM
    Handle Options
    Dimensions & Weights
    Operating Weight** 171 lb 77 kg
    Shipping Weight** 211 lb 96 kg
    * Approximate dimensions include Standard Handle (Sold seperately).
    **Weight does not include handle.
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPLA3648HM

    HPLA3648HM

    4-blade, 46", 11HP Honda; Manual Clutch; High Speed
    Challenging concrete jobs are cut down to size with our high-performance walk-behind trowels.
     
    • Rotor speed of 60-125 rpm
    • Trowel weighs only 171 pounds (77 kg)
    • Ring diameter of 36 inches (915 mm)
    • Driven by an 8-hp Honda gasoline engine
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPLA46411H

    HPLA46411H

    4-blade, 46", 11HP Honda; Low Speed
    The extra horsepower and torque on these walk-behind power trowels give contractors what they need for pan floating applications.
     
    • Gearbox has 50% greater oil capacity
    • A 46-inch (1.17 meters) ring diameter
    • Driven by an 11-hp Honda engine
    • Large tapered bearings minimize friction, reduce operating temperature
    • Rotor speed of 60-125 rpm
     
     
    Unit Specifications
    Clutch Type Centrifugal
    No. of Blades 4
    Ring Diameter 46 in 1168.4 mm
    Rotor Speed 50-108 RPM
    Handle Options
    Dimensions & Weights
    Operating Weight** 245 lb 111 kg
    Shipping Weight** 310 lb 141 kg
    * Approximate dimensions include Standard Handle (Sold seperately).
    **Weight does not include handle.
    Notice: Features and equipment specifications are subject to change without notice.
     


    HPLA46411HM

    HPLA46411HM

    4-blade, 46", 11HP Honda; Manual Clutch; Low Speed
    Challenging concrete jobs are cut down to size with our high-performance walk-behind trowels.
     
    • Gearbox has 50% greater oil capacity
    • A 46-inch (1.17 meters) ring diameter
    • Driven by an 11-hp Honda engine
    • Large tapered bearings minimize friction and reduce operating temperature
    • Rotor speed of 60-125 rpm
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    HTX44Y4

    HTX44Y4

    Non Overlapping twin 48" 44-HP Yanmar Turbo Diesel
    The HTX Series 8-foot (2.4 meters) hydrostatic trowel features innovative technology, operator comfort and ease of operation that concrete contractors expect from the industry leader.
     
    • Hydrostatic power steering
    • Driven by a Yanmar 44-hp low noise diesel engine
    • A 92-inch (2.33 meters) path width
    • Twin 48-inch (1.22 meters) non-overlapping blades
    • Four blades per rotor
     
     
    Unit Specifications
    No. of Blades 4
    Engine Yanmar Turbo Diesel
    Engine Cooling Liquid
    Blades per Rotor 4
    Rotor RPM 140
    Path Width 92 in 2336.8 mm
    Fuel Tank Capacity 11 gal 42 L
    Run Time 2.36 gal/hr
    Dimensions & Weights
    Overall Length 95 in 2413 mm
    Overall Width 48 in 1219.2 mm
    Overall Height 57 in 1447.8 mm
    Operating Weight 1855 lb 841.2 kg
    Notice: Features and equipment specifications are subject to change without notice.
     


    JB5090

    This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.


    • Ideal for standard hook or off-set (dog leg) bends. Straightens rebar from less than 30 degrees
    • Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
    • Costs for couplers, joint welds and inspection delays are greatly minimized
    • Saves time by allowing the removal of column forms prior to bending rebar
    • Bends #5 5/8-inch 16 mm) rebar to an ACI approved radius and ideal for general purpose bending with up to #6 3/4-inch (19 mm) rebar

    Technical Documentation

    >> Rebar-benders-JIMMY-SERIES-rev-9-manual

    UNIT SPECIFICATIONS
    Max. Bending Angle 90
    Max. Rebar Size #4, #5, #6, #7
    Min. Bending Angle* 5 in 127 mm
    Min. Bar Spacing
    on Center    		 3
    ACI Approved
    Max. Bending Angle**    		 90
    ACI Approved
    Max. Rebar Size    		 #5

    DIMENSIONS & WEIGHTS
    Overall Length 17 in 432 mm
    Overall Width 9 in 229 mm
    Overall Height 4.5 in 114 mm
    Shipping Dimensions 24 x 13 x 4.5 in
    609.6 x 330.2 x 381 mm
    Operating Weight 26 lb 12 kg
    Shipping Weight 39 lb 18 kg

    POWER SOURCE
    All JB Series Rebar Benders require a seperately purchased drive motor to function.
    Click below to see Multiquip's availible Drive Motors.
    >>JB5090

    APPLICATIONS & ACCESSORIES
    Applications 90° Standard Hook
    180° Cane Hook
    Stirrup and Tie Hook
    Seismic Stirrup and Tie Hook
    Offset Bends
    Straightening
    Accessories two bending wheels
    10-foot hose with coupler

    * Minimum Bend measured from bottom of the machine to the top of the bend angle.
    **American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated.

    Notice: Features and equipment specifications are subject to change without notice.

    JB5135

    This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.


    • Ideal for standard hook, stirrups and seismic hooks
    • Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
    • Costs for couplers, joint welds and inspection delays are greatly minimized
    • Saves time by allowing the removal of column forms prior to bending rebar
    • Bends #5 5/8-inch (16 mm) rebar to an ACI approved radius

    Technical Documentation

    >> Rebar-benders-JIMMY-SERIES-rev-9-manual

    UNIT SPECIFICATIONS
    Max. Bending Angle 135
    Max. Rebar Size #4, #5
    Min. Bending Angle* 5 in 127 mm
    Min. Bar Spacing
    on Center    		 2
    ACI Approved
    Max. Bending Angle**    		 135
    ACI Approved
    Max. Rebar Size    		 #5

    DIMENSIONS & WEIGHTS
    Overall Length 23 in 584 mm
    Overall Width 11 in 279 mm
    Overall Height 3.5 in 89 mm
    Shipping Dimensions 24 x 13 x 3.5 in
    609.6 x 330.2 x 381 mm
    Operating Weight 22 lb 10 kg
    Shipping Weight 34 lb 15 kg

    POWER SOURCE
    All JB Series Rebar Benders require a seperately purchased drive motor to function.
    Click below to see Multiquip's availible Drive Motors.
    >>JB5135

    APPLICATIONS & ACCESSORIES
    Applications 90° Standard Hook
    180° Cane Hook
    Stirrup and Tie Hook
    Seismic Stirrup and Tie Hook
    Offset Bends
    Straightening
    Accessories hook
    bending wheel
    10-foot hose with coupler

    * Minimum Bend measured from bottom of the machine to the top of the bend angle.
    **American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated.

    Notice: Features and equipment specifications are subject to change without notice.

    JB7090

    This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.


    • Ideal for standard hook or off-set (dog leg) bends. Straightens rebar from less than 30 degrees
    • Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
    • Costs for couplers, joint welds and inspection delays are greatly minimized
    • Saves time by allowing the removal of column forms prior to bending rebar
    • Bends #7 7/8-inch (22 mm) rebar to an ACI approved radius and ideal for general purpose bending with up to #8 1-inch (25 mm) rebar

    Technical Documentation

    >> Rebar-benders-JIMMY-SERIES-rev-9-manual

    UNIT SPECIFICATIONS
    Max. Bending Angle 90
    Max. Rebar Size #6, #7, #8
    Min. Bending Angle* 8 in 203 mm
    Min. Bar Spacing
    on Center    		 3
    ACI Approved
    Max. Bending Angle**    		 90
    ACI Approved
    Max. Rebar Size    		 #7

    DIMENSIONS & WEIGHTS
    Overall Length 21.5 in 546 mm
    Overall Width 12.5 in 318 mm
    Overall Height 5.5 in 140 mm
    Shipping Dimensions 24 x 13 x 5.5 in
    609.6 x 330.2 x 381 mm
    Operating Weight 58 lb 26 kg
    Shipping Weight 74 lb 33 kg

    POWER SOURCE
    All JB Series Rebar Benders require a seperately purchased drive motor to function.
    Click below to see Multiquip's availible Drive Motors.
    >>JB7090

    APPLICATIONS & ACCESSORIES
    Applications 90° Standard Hook
    180° Cane Hook
    Stirrup and Tie Hook
    Seismic Stirrup and Tie Hook
    Offset Bends
    Straightening
    Accessories two bending wheels
    10-foot hose with coupler

    * Minimum Bend measured from bottom of the machine to the top of the bend angle.
    **American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated.

    Notice: Features and equipment specifications are subject to change without notice.

    JB7135

    This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.


    • Ideal for standard hook, stirrups and siesmic hooks
    • Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
    • Costs for couplers, joint welds and inspection delays are greatly minimized
    • Saves time by allowing the removal of column forms prior to bending rebar
    • Bends #7 3/4-inch (22 mm) rebar to an ACI approved radius.

    Technical Documentation

    >> Rebar-benders-JIMMY-SERIES-rev-9-manual

    UNIT SPECIFICATIONS
    Max. Bending Angle 135
    Max. Rebar Size #6, #7
    Min. Bending Angle* 5 in 127 mm
    Min. Bar Spacing
    on Center    		 2
    ACI Approved
    Max. Bending Angle**    		 135
    ACI Approved
    Max. Rebar Size    		 #7

    DIMENSIONS & WEIGHTS
    Overall Length 19 in 483 mm
    Overall Width 9 in 229 mm
    Overall Height 3 in 76 mm
    Shipping Dimensions 24 x 13 x 3 in
    609.6 x 330.2 x 381 mm
    Operating Weight 26 lb 12 kg
    Shipping Weight 47 lb 21 kg

    POWER SOURCE
    All JB Series Rebar Benders require a seperately purchased drive motor to function.
    Click below to see Multiquip's availible Drive Motors.
    >>JB7135

    APPLICATIONS & ACCESSORIES
    Applications 90° Standard Hook
    180° Cane Hook
    Stirrup and Tie Hook
    Seismic Stirrup and Tie Hook
    Offset Bends
    Straightening
    Accessories bending wheel
    10-foot hose with coupler

    * Minimum Bend measured from bottom of the machine to the top of the bend angle.
    **American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated.

    Notice: Features and equipment specifications are subject to change without notice.

    JB8090

    This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.


    • Ideal for standard hook or off-set (dog leg) bends. Straightens rebar from less than 30 degrees
    • Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
    • Costs for couplers, joint welds and inspection delays are greatly minimized
    • Saves time by allowing the removal of column forms prior to bending rebar
    • Bends #8 1-inch (25 mm) rebar to an ACI approved radius and ideal for general purpose bending with up to #9 1 1/8-inch (29 mm) rebar

    Technical Documentation

    >> Rebar-benders-JIMMY-SERIES-rev-9-manual

    UNIT SPECIFICATIONS
    Max. Bending Angle 90
    Max. Rebar Size #6, #7, #8, #9
    Min. Bending Angle* 8 in 203 mm
    Min. Bar Spacing
    on Center    		 3
    ACI Approved
    Max. Bending Angle**    		 90
    ACI Approved
    Max. Rebar Size    		 #8

    DIMENSIONS & WEIGHTS
    Overall Length 27 in 686 mm
    Overall Width 14 in 356 mm
    Overall Height 5.5 in 140 mm
    Shipping Dimensions 30 x 13 x 5.5 in
    762 x 330.2 x 609.6 mm
    Operating Weight 62 lb 29 kg
    Shipping Weight 89 lb 40 kg

    POWER SOURCE
    All JB Series Rebar Benders require a seperately purchased drive motor to function.
    Click below to see Multiquip's availible Drive Motors.
    >>JB8090

    APPLICATIONS & ACCESSORIES
    Applications 90° Standard Hook
    180° Cane Hook
    Stirrup and Tie Hook
    Seismic Stirrup and Tie Hook
    Offset Bends
    Straightening
    Accessories two bending wheels
    10-foot hose with coupler

    * Minimum Bend measured from bottom of the machine to the top of the bend angle.
    **American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated.

    Notice: Features and equipment specifications are subject to change without notice.

    JPU1

    Jimmy electro-hydraulic drive 115-Volt motor.


    • Electro-hydraulic power pack uses 115-Volt power and is light enough to easily move around the job site
    • Includes remote control with 25-foot (7.5 meters) cable for operator convenience. Can also be used manually

    Technical Documentation

    No electronic documentation available. Please contact our Literature Department for more information.

    UNIT SPECIFICATIONS
    Power 1.5 HP 1.2 kW
    Voltage 115 V
    Frequency 60 HZ
    Speed 1725 RPM
    Sound Level 80 dBA

    DIMENSIONS & WEIGHTS
    Overall Length 14.625 in 371.48 mm
    Overall Width 10.25 in 260.35 mm
    Overall Height 18.25 in 463.55 mm
    Operating Weight 79 lb 36 kg

    HYDRAULIC SPECIFICATIONS
    Flow Rate 61 in³/min 240 cm³/min
    Pressure 10000 PSI 69000 kPA
    Control Valve Manual
    3-Position


    Notice: Features and equipment specifications are subject to change without notice.
    LS40TD

    LS40TD

    Hydraulic 40 yd. HR, Deutz BF4L2011 Turbo 79 HP
    Big pump performance. Reasonably priced.
     
    • Concrete piston face pressure of 925 PSI (64 Bar)
    • Concrete cylinder diameter is 6 inches (152 mm) with 36-inch stroke (914 mm)
    • Horizonal pumping distance of 1000 feet (300 meters), vertical is 250 feet (75 meters) 
    • Powered by a 79-hp (58.9kW) Deutz BF4L2011 turbo diesel
    • Designed for aggregate sized up to 1-1/2 inches (38 mm)
    • Hard faced wear components for longer life 
    • Variable volume output of 40 cubic yards (30 cubic meters) per hour
    • Ideal for use with refractory, shotcrete, masonry block fill, slabs
    • Reliable solid state electronic control box
    • Optional wireless radio remote has a range of 1000 feet (300 meters)
    • Optional air or electric vibrators for hopper screen
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 915 mm
    Hydraulic Cylinders 3 x 36 in 76 x 915 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-40 yd³ 0-30 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 54 in 1372 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 4760 lb 2159 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    LS40TDWR

    LS40TDWR

    LS40TD with wireless radio remote
    This mid-range structural pump is extremely versatile, ideal for a wide range of applications. Featuring wireless radio remote operating range up to 1000 feet (300 meters). Frequency hopping on a 900 MHz band ensures maximum reliability.
     
    • Generates concrete pressure of 925 PSI (63 BAR)
    • Designed for aggregate sized 3/4, 1 and 1-1/2 inches (19 to 38 mm)
    • Hopper remix agitator standard
    • Includes wireless radio remote with range up to 1000 (300 meters) feet
    • Featuring solid state electronic control box
    • Variable volume output of 40 cubic yards (30 cubic meters) per hour
    • Ideal for use with concrete placing, shotcrete, masonry block fill, slabs
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 915 mm
    Hydraulic Cylinders 3 x 36 in 76 x 915 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-40 yd³ 0-30 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 54 in 1372 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 4760 lb 2159 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    LS50TD

    LS50TD

    Hydraulic 50 yd. HR, Deutz BF4L2011 Turbo 79 HP
    Mayco's mid-range pumps are the economical way to place 1 1/2-inch (38 mm) aggregrate concrete pump mixes.
     
    • Places up to 1-1/2 inch (38 mm) aggregate sizes
    • Output up to 50 cubic yards (38 cubic meters) per hour
    • Designed for concrete pumping services and specialty contractors
    • Excels on slabs, decks, footings and shotcreting
    • Powered by an 79-hp (58.9kW) Deutz BF4L2011 turbo diesel
    • Concrete cylinder diameter is 6 inches (152 mm) with 36-inch stroke (914mm) 
    • Features an easily removable hopper, extra heavy-duty mainframe with 40-gallon (151 liters) fuel cell, hard faced welded wear components
    • Reliable solid state electronic control box featuring shuttle tube reverse for smoother pumping
    • Optional wireless radio remote has 1000-foot range (300 meters)
    • Optional air or electric vibrator for hopper screen
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 914 mm
    Hydraulic Cylinders 3 x 36 in 76 x 914 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-50 yd³ 0-38 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 55 in 1397 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 4760 lb 2159 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    LS50TDWR

    LS50TDWR

    LS50TD with wireless radio remote
    The economical way to place 1 1/2-inch (38 mm) aggregate concrete pump mixes. Featuring wireless radio remote operating range up to 1000 feet (300 meters). Frequency hopping on a 900 MHz band ensures maximum reliability.
     
    • Places 1-1/2-inch (38 mm) aggregate mixes
    • Designed for concrete pumping and specialty contractors
    • Driven by a 79-hp (58.9kW) Deutz diesel engine
    • Excels in shotcreting (wetgunning), working on slabs, decks, footings
    • Pumps up to 50 cubic yards (38 cubic meters) per hour
    • Features an easy to remove hopper, heavy-duty main frame with 40-gallon (152 liters) fuel cell
    • Hopper remixer/agitator is standard
    • Reliable solid state control box featuring reverse pumping
    • Optional air or electric hopper screen vibrator
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 914 mm
    Hydraulic Cylinders 3 x 36 in 76 x 914 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-50 yd³ 0-38 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 55 in 1397 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 4760 lb 2159 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    LS60TD

    LS60TD

    60 yd. HR, Deutz BF4L914 Turbo 110 HP
    Mayco has been making the world's best concrete pumps for more than 40 years. Here's another reason why.
     
    • Mayco largest model pumps up to 60 cubic yards (46 cubinc meters) per hour
    • Powered by a 110-hp (62kW) Deutz BF4L914 turbo diesel
    • Concrete cylinder diameter is 6 inches (152 mm) with 36-inch stroke (914 mm)
    • Horizonal pumping distance of 1000 feet (300 meters), vertical is 250 feet (76 meters) 
    • Extremely versatile: ideal for slabs, decks, footings, shotcreting and compaction grouting
    • Maximum concrete face pressure of 900 PSI (62 Bar)
    • Hard-faced wear components for long trouble-free pumping
    • Reliable solid-state electronic control box features true shuttle tube reverse for smoother pumping
    • Optional wireless radio remote has a range up 1000 feet range (330 meters)
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 914 mm
    Hydraulic Cylinders 3 x 36 in 76 x 914 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-60 yd³ 0-48 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 55 in 1397 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 5190 lb 2354 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    LS60TDWR

    LS60TDWR

    LS60TD with wireless radio remote
    Big pump performance, reasonably priced! Featuring wireless radio remote operating range up to 1,000 feet (300 meters). Frequency hopping on a 900 MHz band ensures maximum reliability.
     
    • Pumps up to 60 cubic yards (46 cubic meters) per hour
    • Mayco's largest concrete pump
    • Heavy duty main frame with 40-gallon (151 liters) fuel cell
    • Remixer/agitator is standard
    • Pumps up to 300 feet (90 meters), down to 150 feet (45 meters)
    • Ideal for shotcreting, chemical/organic slurries, compaction grouting
    • Hydraulic pressure of 900 psi (62KW)
    • Optional wireless remote control operation
    • Optional air or electric vibrators for hopper screen
     
     
    Unit Specifications
    Hopper Height 42 in 1067 mm
    Hopper Capacity 10 ft³ 0.283 L
    Pump Outlet 5 in 127 mm
    Concrete Cylinders 6 x 36 in 152 x 914 mm
    Hydraulic Cylinders 3 x 36 in 76 x 914 mm
    Hydraulic Oil Capacity 58 gal 219 L
    Fuel Tank Capacity 40 gal 151 L
    Brake Type Hydraulic Surge
    Pumping Specifications
    Pumping Rate
    per Hour    		 0-60 yd³ 0-48 m³
    Vertical Pumping Height 250 ft 76 m
    Horizontal Pumping Distance 1000 ft 305 m
    Max. Concrete Pressure 925 psi 64 bar
    Max. Aggregate Size 1.5 in 38 mm
    Note: These figures will vary due to concrete mix design, line size, and job site conditions.
    Dimensions & Weights
    Overall Length 172 in 4369 mm
    Overall Width 67 in 1702 mm
    Overall Height 55 in 1397 mm
    Shipping Dimensions 0 x 0 x 0 in
    0 x 0 x 0 mm
    Operating Weight 5190 lb 2354 kg
    Shipping Weight 0 lb 0 kg
    All weights are approximate. Exact weight is dependant upon power source used.
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB1000

    MB1000

    54" (1370 mm) 1000-watt metal-halide bulb, 120/240V
    MB1000 shown with optional generator and model MBS 2-wheel stand.
    Moonlight glare-free lights provide an economical solution for lighting job sites, special events and industrial applications. The MB1000 is a 54-inch (1.37 meters) diameter PVC balloon with a 1,000-watt metal-halide bulb to meet your application requirements.
     
    • Balloon is shipped in a storage case that includes: balloon, bulb, light fixture, electrical cord, blower and support base
    • Durable PVC balloon inflates with a portable inflater and remains inflated. Eliminates the need for a fan to continuously fed air into the balloon
    • Easy to transport and set up with a mounting accessory (sold separately)
    • 1,000-watt metal-halide bulb provides up to 10,000 hours of life and produces a clean, white light
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB1000W

    MB1000W

    54" (1370 mm) 1000-watt tungsten-carbide bulb, 120/240V
    Shown with optional generator and MBC generator cart
    Moonlight glare-free lights provide an economical solution for lighting job sites, special events and industrial applications. The MB1000 is a 54-inch (1.37 meters) diameter PVC balloon with a 1,000-watt tungsten-carbide bulb to meet your application requirements.
     
    • Balloon is shipped in a storage case that includes: balloon, bulb, light fixture, electrical cord, blower and support base
    • Durable PVC balloon inflates with a portable inflater and remains inflated. Eliminates the need for a fan to continuously fed air into the balloon
    • Easy to transport and set up with a mounting accessory (sold separately)
    • 1,000-watt tungsten-carbide bulb provides clean light and makes this unit an excellent value
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB150

    MB150

    33.5" (851mm) 150-watt metal-halide bulb, 120/240V
    Moonlight glare-free lights provide an economical solution for lighting job sites, special events and industrial applications. The MB150 is a 33.5-inch (851 mm) diameter PVC balloon with a 150-watt metal-halide bulb to meet your application requirements.
     
    • Balloon is shipped in a storage case that includes: balloon, bulb, light fixture, electrical cord, blower and support base
    • Durable PVC balloon inflates with a portable inflater, and remains inflated. Eliminates the need for a fan to continuously fed air into the balloon
    • Easy to transport and set up with a mounting accessory (sold separately)
    • 1,000-watt metal-halide bulb provides clean white light and rated for 10,000 hour life
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB25HD

    MB25HD

    Rebar Bender, Bench Type, 1" Bar Capacity, 115V
    This rebar bender is ideal for both high-production workshops or job sites.
     
    • Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
    • Standard foot switch allows you to bend rebar while freeing your hands for material handling.
    • Driven by a 115-Volt, single-phase electric motor
    • A complete set of rollers and collars is included to quickly change your bending radius.
    • Four built-in lifting handles are provided for easy movement around the job site.
     
     
    Unit Specifications
    Max. Rebar Diameter 1 in 25.4 mm
    Bending Range 0 to 180°
    Max. Bending Speed 180° - Approx. 5 sec
    Electric Motor 115V, 60 Hz, 1Ø, AC
    Dimensions & Weights
    Overall Length 16.1 in 409 mm
    Overall Width 17.9 in 454.6 mm
    Overall Height 19.5 in 482.6 mm
    Operating Weight 300 lb 136 kg

    Bending Radius Specifications
    No. 3 Rebar Diameter 3/8 in 9.5 mm
    Radius 3/4 in 19 mm
    No. 4 Rebar Diameter 1/2 in 12.7 mm
    Radius 15/16 in 24 mm
    No. 5 Rebar Diameter 5/8 in 15.9 mm
    Radius 1-1/16 in 28 mm
    No. 6 Rebar Diameter 3/4 in 19 mm
    Radius 1-7/8 in 22 mm
    No. 7 Rebar Diameter 7/8 in 22.2 mm
    Radius 2-3/16 in 55 mm
    No. 8 Rebar Diameter 1 in 25.4 mm
    Radius 2-7/16 in 62 mm
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB400

    MB400

    33.5" (851mm) 400-watt metal-halide bulb, 120/240V
    Moonlight glare-free lights provide an economical solution for lighting jobsites, special events and industrial applications. The MB400 is a 33.5-inch (851 mm) diameter PVC balloon with a 1,000 watt metal-halide bulb to meet your application requirements.
     
    • Balloon is shipped in a storage case that includes: balloon, bulb, light fixture, electrical cord, blower and support base
    • Durable PVC balloon inflates with a portable inflater and remains inflated. Eliminates the need for a fan to continuously fed air into the balloon
    • Easy to transport and set up with a mounting accessory (sold separately)
    • 400 watt metal-halide bulb provides clean light and a tremendous value
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MB400B

    MB400B

    54" (1370 mm) 400-watt metal-halide bulb, 120/240V
    MB400 balloon light shown with optional MBP mounting pole
    Moonlight glare-free lights provide an economical solution for lighting job sites, special events and industrial applications. The MB400B is a 54-inch (1.37 meters) diameter PVC balloon with a 400-watt metal-halide bulb to meet your application requirements.
     
    • Balloon is shipped in a storage case that includes: balloon, bulb, light fixture, electrical cord, blower and support base
    • Durable PVC balloon inflates with a portable inflater, and remains inflated. Eliminates the need for a fan to continuously feed air into the balloon
    • Easy to transport and set up with a mounting accessory (sold separately)
    • 400-watt metal-halide bulb provides clean, white light and rated for long life
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MDR9DYE

    MDR9DYE

    32" width, 10-hp Yanmar L-100 Diesel
    Asphalt and mixed granular soil compaction jobs are a breeze with the MDR9DYE
     
    • Great for asphalt, mixed granular soil jobs
    • 28-inch (71 cm) wide drum
    • 10-horsepower Yanmar L-100 diesel engine
    • Exudes 9,600 pounds (4,354 kg) of compaction force
    • Weighs 1,922 pounds (872 kg)
    • 6-gallon (23 liters) water tank
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MDR9GH

    MDR9GH

    Double drum, Honda GX340, 28" drum
    An industry staple for flat work, this roller is ideal for granular soils and asphalt applications.
     
    • Hydrostatic drive eliminates drive belts and adjustments
    • Infinite variable speed control gives the operator full control with forward and reverse speeds
    • External mounted vibrator assembly for easy maintenance access
    • Deadman safety control stops roller movement when operator removes hands from the control levers
    • Large rubber shockmounts minimize drum vibration transfer to engine and hydraulic components
    • Guidehandle folds up 90 degrees for easy transport, storage
    • Front mounted travel level accellerates speed for transport purposes
    • Built-in tie downs on all four corners secure the roller during transport
     
     
    Notice: Features and equipment specifications are subject to change without notice.
     


    MP150HDSM

    Prime-assist pumps with true multi-purpose capability


    • Primes dry: up to a 30 ft. (9.1 meters) lift in 30 seconds and can run dry
    • Multi-purpose: pumps trash, sewage, sludge, and runs wellpoints systems
    • Easy to use and tow: Turn the key and start pumping, up to 72 hours run time
    • High performance: from 2,700 GPM to 5,200 GPM, up to 143 ft. heads (flows to 9.4 to 18.9 m3/m, heads up to 44 meters)
    • Low maintenance: Oil bath mechanical seal, direct drive vacuum pump (no belts)
    • No pollution: Water lube vacuum pump (no oil leaks), no unwanted priming system discharge
    • Discharge line may be reduced or enlarged to fit project requirements

    Technical Documentation

    >> Pumps-dry-prime-mp150-mp200-series-rev-5-parts-manual

    pumps-dry-prime-instaprime-MP200DSM_rdax_250x160.jpg
    UNIT SPECIFICATIONS
    Suction x Discharge 6 x 6 in
    150 x 150 mm
    Max. Water Flow 2500 gpm 9.4 m³pm
    Max. Suction Lift 30 ft 9.1 m
    Max. Head 122 ft 37 m
    Max. Solids 3.2 in 81.2 mm
    Sound Levels 74 dBA
    Fuel Tank Capacity 148 gal 9.1 L
    Run Time 72 hours

    DIMENSIONS & WEIGHTS
    Operating Weight* 3810 lb 1442 kg
    Notes:*Unit weighed skid-mounted

    Engine Specifications
    Engine Make/Model Deutz F3L914-40
    Start Method Electric
    Engine Power 40 HP 29.8 kW