|
|
|
|
This compact rebar bender is ideal for both high-production workshops or job sites.
- Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
- Angle adjustment knob allows fine tuning of bending angle
- Standard foot switch allows you to bend rebar while freeing your hands for material handling.
- Driven by a 115-Volt, single-phase electric motor
- A complete set of rollers and collars is included to quickly change your bending radius.
- Two built-in lifting handles are provided for easy movement around the job site.
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
| Max. Rebar Diameter |
1 in |
25.4 mm |
| Bending Range |
0 to 180° |
| Max. Bending Speed |
180° - Approx. 5 sec sec |
| Electric Motor |
115V, 60 Hz, 1Ø, AC |
|
| Overall Length |
17 in |
432 mm |
| Overall Width |
17 in |
432 mm |
| Overall Height |
17 in |
432 mm |
| Shipping Dimensions |
28 x 23 x 17 in
711 x 584 x 603 mm
|
| Operating Weight |
227 lb |
103 kg |
| Shipping Weight |
331 lb |
150 kg |
|
| No. 3 Rebar |
Diameter |
3/8 in |
9.5 mm |
| Radius |
2.25 in |
57 mm |
| No. 4 Rebar |
Diameter |
1/2 in |
13 mm |
| Radius |
3 in |
76 mm |
| No. 5 Rebar |
Diameter |
5/8 in |
15.9 mm |
| Radius |
3.75 in |
95 mm |
| No. 6 Rebar |
Diameter |
3/4 in |
19 mm |
| Radius |
4.5 in |
114 mm |
| No. 7 Rebar |
Diameter |
7/8 in |
22.2 mm |
| Radius |
5.25 in |
133 mm |
| No. 8 Rebar |
Diameter |
1 in |
25.4 mm |
| Radius |
6 in |
152.4 mm |
|
| Standard Accessories |
Foot Switch
Rollers (5 sizes)
Collars (6 sizes)
Tool Kit
Waterproof Cover |
|
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
