Location: Carson California Price: $22700.00
New small scratches special offer.
Mayco C30HD Series Small Line Concrete Pump
*Mayco’s C30HD series has been in production for nearly
50 years and is still the most popular small line concrete
pump available today.
This versatile piston pump will easily handle up to !/2 inch
minus aggregate and pump up to 25 cubic yards per hour.
The C30HD series handles a variety of mix designs including
harsh, stiff and low slump mixes.
A direct flow manifold with oversized valves assures
maximum volume and minimizes the chance of blockages and
cavitation.
The C30HD series is engineered to require only minimal
maintenance and upkeep. All comp onents are
manufactured from the highest quality materials and built to
exacting specifications to maximize service life.
*The C30HD series is ideal for shotcrete applications of stiff,
low slump mixes — swimming pools, ditch linings, soil
stabilization, walls and more.
*Powerful engine — 68 HP Zenith gasoline engine. Smoothest running engine in the industry
*Central lubrication system — enclosed lubrication box
provides clean, positive piston lubrication.
*Three-speed volume control — enables the operator
to control the flow.
*Standard with each C30HD: 3" x 90° Elbow — with
heavy duty raised ends; 3" x 2" Reducer — with heavy
duty raised ends; Two 3" adjustable snap couplings
for the full specs please call Mike Lopez @ (310) 400-1365 or via email to Mlopez@multiquip.com
Location: Carson California Price: $23727.00
New used a a Demo one time...Special offer!
Mayco C30HD Series Small Line Concrete Pump *Mayco’s C30HD series has been in production for nearly 50 years and is still the most popular small line concrete pump available today. This versatile piston pump will easily handle up to !/2 inch minus aggregate and pump up to 25 cubic yards per hour. The C30HD series handles a variety of mix designs including harsh, stiff and low slump mixes. A direct flow manifold with oversized valves assures maximum volume and minimizes the chance of blockages and cavitation. The C30HD series is engineered to require only minimal maintenance and upkeep. All comp onents are manufactured from the highest quality materials and built to exacting specifications to maximize service life. *The C30HD series is ideal for shotcrete applications of stiff, low slump mixes — swimming pools, ditch linings, soil stabilization, walls and more. *Powerful engine — 68 HP Zenith gasoline engine. Smoothest running engine in the industry *Central lubrication system — enclosed lubrication box provides clean, positive piston lubrication. *Three-speed volume control — enables the operator to control the flow. *Standard with each C30HD: 3" x 90° Elbow — with heavy duty raised ends; 3" x 2" Reducer — with heavy duty raised ends; Two 3" adjustable snap couplings for the full specs please call Mike Lopez @ (310) 400-1365 or via email to Mlopez@multiquip.com
Location: Carson California Price: $90.00
EM28060 TUBE - 2"x11GAx10' - Steel - HD Ends
used on two demos....special offer for all.
for use on the C30 Mayco pumps.
Location: Carson California Price: $12.00
Hose-O Hose Protector Protects the jobsite from damage caused by the weight and movement of the pump hose * Protects hose * Protects contractor forms * Protects decorative surfaces * Frees clamps from wire mesh * Protects existing surfaces * Works equally well on reducers and steel pipe Hose-O prevents jobsite damage caused by the weight and movement of the pump hose. A round ring of lightweight, durable polyethylene foam, the Hose-O fits easily onto hoses from 2 to 4 inches in diameter. The install/removal slit makes installing it around a hose quick and easy. Once installed, the hose sits as much as 4 inches off the ground, and the foam won’t damage whatever surface it’s resting on. Place a Hose-O on the pour side of each clamp where you want protection. For extra protection, simply use more. If reducers are used, place a Hose-O on the hose ends at each end of the reducer. The Hose-O is also ideal for water pump applications — it keeps hoses out of mud, damaging rocks and debris. Easy To Install! 1. Lay out the delivery system (hoses/pipes) as you normally would to set up for the job. 2. Wherever protection from friction wear is desired, place a Hose-O upright under your delivery system with the install/removal slit facing up. 3. Remove the Strengthing Rod from the Hose-O. 4. Press your delivery system through the entry slit until it rests snugly in the interior hole of the Hose-O. 5. Insert the Strengthing Rod back into the side of the Hose-O. Fits this size hose: 3" (HoseO 30)
Location: Carson California Price: $12.00
Hose-O Hose Protector
Protects the jobsite from damage caused by
the weight and movement of the pump hose
* Protects hose
* Protects contractor
forms
* Protects decorative
surfaces
* Frees clamps from wire
mesh
* Protects existing
surfaces
* Works equally well on
reducers and steel pipe
Hose-O prevents jobsite damage caused by the
weight and movement of the pump hose. A round ring
of lightweight, durable polyethylene foam, the Hose-O fits
easily onto hoses from 2 to 4 inches in diameter.
The install/removal slit makes installing it around a hose
quick and easy. Once installed, the hose sits as much
as 4 inches off the ground, and the foam won’t damage
whatever surface it’s resting on.
Place a Hose-O on the pour side of each clamp where you
want protection. For extra protection, simply use more. If
reducers are used, place a Hose-O on the hose ends at
each end of the reducer.
The Hose-O is also ideal for water pump applications — it
keeps hoses out of mud, damaging rocks and debris.
Easy To Install!
1. Lay out the delivery system (hoses/pipes) as you
normally would to set up for the job.
2. Wherever protection from friction wear is desired,
place a Hose-O upright under your delivery system
with the install/removal slit facing up.
3. Remove the Strengthing Rod from the Hose-O.
4. Press your delivery system through the entry slit until
it rests snugly in the interior hole of the Hose-O.
5. Insert the Strengthing Rod back into the side of the
Hose-O.
Fits this size hose: 2½" (HoseO 25)
Location: Carson CA Price: $1050.00
New in the box...for use on models LS40, 50, 60
The Exclusive Mayco Wireless Radio Remote
*Rugged design
*Weatherproof
*On/off/true reverce/volume control remote functions
*Emergency stop button
*Frequency hopping for maximum reliability
