|
|
|
|
Multiquip’s rugged walk-behind tandem rollers all feature advanced engineering and design satisfying the needs of the most demanding contractors.
- Hydrostatic drive eliminates drive belts and adjustments
- Infinite variable speed control gives the operator full control with forward, reverse speeds
- External mounted vibrator assembly for easy maintenance access
- Deadman safety control stops roller when the operator takes hands off the control levers
- Large rubber shock mounts minimize drum vibration transfer to engine, hydraulic components
- Guide handle folds up 90 degrees for easy transport and storage
- Narrow profile design for less than 1 inch (25 mm) side clearance
- Dual sprinkler controls wet drum individually
- Single access maintenance cover for easy access to all hydraulic components
- Permanently lubricated bearings are maintenance free
- Built-in tie-downs on all four corners secure the roller during transport
Technical Documentation
|
|
|
|
| Compaction Force |
5300 lb |
2404 kg |
| Frequency |
3300 VPM |
55.3 Hz |
| Front Drum Width |
25.6 in |
cm |
| Rear Drum Width |
25.6 in |
cm |
| Travel Speed |
0-2 mph |
0-3 kph |
| Water Tank Capacity |
10.6 gal |
40.3 L |
|
| Overall Length |
0 in |
cm |
| Overall Width |
27.2 in |
cm |
| Overall Height |
0 in |
0 cm |
|
| Engine Make/Model |
Honda GX-390 |
| Start Method |
Recoil |
| Engine Power |
13 HP |
9.6 kW |
| Engine RPM |
3600 |
| Fuel Type |
Gasoline |
|
|
Notice: Features and equipment specifications are subject to change without notice.
