|
|
|
|
True Hard Rock Pumping in a Smaller Package
- Concrete piston face pressure of 800 PSI (55 Bar)
- Concrete cylinder diameter is 6 inches (152 mm) with 24-inch stroke (610 mm)
- Horizonal pumping distance of 800 feet (243 meters), vertical is 200 feet (61 meters)
- Powered by a 67-hp (50kW) Deutz TD2009 turbo diesel
- Designed for aggregate sized up to 1-1/2 inches (38 mm)
- True Reverse allows stroke change during any point in the pumping cycle
- Hard faced wear components for longer life
- Variable volume output of 30 cubic yards (23 cubic meters) per hour
- Ideal for use with shotcrete, masonry block fill, slabs, footings, lightweight, & blend mixes
- Innovative DCP (Digital Control Panel) solid state electronic control box with full diagnostic & performance monitoring
- Wireless radio remote included - has a range of 1000 feet (300 meters)
- Optional air or electric vibrators for hopper screen
Technical Documentation
|
|
|
|
| Hopper Height |
43 in |
1092 mm |
| Hopper Capacity |
10 ft³ |
283 L |
| Pump Outlet |
5 in |
127 mm |
| Concrete Cylinders |
6 x 24 in |
152 x 610 mm |
| Hydraulic Cylinders |
3 x 24 in |
76 x 610 mm |
| Hydraulic Oil Capacity |
33 gal |
125 L |
| Fuel Tank Capacity |
16 gal |
61 L |
| Brake Type |
Hydraulic Surge |
|
| Overall Length |
158 in |
4013 mm |
| Overall Width |
65 in |
1651 mm |
| Overall Height |
66 in |
1676 mm |
| Operating Weight |
3750 lb |
1701 kg |
| All weights are approximate. Exact weight is dependant upon power source used. |
|
Pumping Rate
per Hour |
0 - 30 yd³ |
0 - 23 m³ |
| Vertical Pumping Height |
200 ft |
61 m |
| Horizontal Pumping Distance |
800 ft |
243 m |
| Max. Concrete Pressure |
800 psi |
55 bar |
| Max. Aggregate Size |
1.5 in |
38 mm |
| Note: These figures will vary due to concrete mix design, line size, and job site conditions. |
|
| Standard Features |
DCP - Digital Control Panel w/Diagnostic Readout
Hard Faced Wear Components |
| Optional Accessories |
Radio Remote Control
Hopper Screen Vibrator |
|
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
