DLW400ESA
This CC (constant current) and CV (constant voltage) welder delivers up to 400 amps of operation for one man, or simultaneous two man operation with 200 amps of output per person. As a generator it provides up to 14kW of 120/240 volt AC power. A digital display provides both amperage/voltage and troubleshooting error code information to the operator. In E-mode the unit can weld at idle speed to optimize fuel economy. Additionally, this unit can be simultaneously used as a welder and generator. Low noise levels of only 67.5dBA.
- Draws simultaneous AC power while welding
- The convenience of one-man or two-man opeation
- Delivers up to 400 amps as a welder, 14kW of AC power
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding
- Smooth arc characteristics and more consistent, quality welds
- Super clean voltage regulation 1.5% (+/-)
- Tier 4 interim Kubota diesel engine V1305
- E-mode improves fuel efficiency b allowing oprator to weld at idle up to 240 amps
- Noise level produces only 67.5 dBA
| DC Voltage | CC: 34, 2 x 27cc V | |
| DC Current | CC: 400cc, 2 x 200ccA | |
| Current Range | 70-400, 2x35-200 A | |
| Max Duty Cycle w/ Full Amps Availible |
100% @2 x 175 A | |
| Welding Processes | SMAW FCAW GTAW ACAC |
|
| Fuel Tank Capacity | 11.1 gal | 42 L |
| Fuel Consumption at Rated Load |
1.5 gph | |
| AC Power Output (Single Phase) |
14 kW | |
| Cycle | 50/60 Hz | |
| Voltage | 120/240 V | |
| Amperage | 116/58 A | |
| Voltage Regulation | 1.5 % | |
| Receptacles | NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A |
|
**TRLR-MPXF has a built in 28 gal. fuel cell
| Overall Length | 61 in | 155 mm |
| Overall Width | 29 in | 74 mm |
| Overall Height | 35 in | 89 mm |
| Shipping Dimensions |
63 x 30 x 41 in 160 x 76.2 x 104 mm |
|
| Operating Weight | 1090 lb | 495 kg |
| Shipping Weight | 1112 lb | 505 kg |
Notice: Features and equipment specifications are subject to change without notice.
