HBC19A
The HBC-19 uses an electro-hydraulic design to handle virtually any rebar cutting job, from slabs and masonry walls to large buildings and bridges.
- Cuts rebar up to 0.75-inches (20 mm) thick in 3 seconds
- 115V, 60 Hz single-phase motor
- Hydrualic pump features magnetic particle filtering for maximum life
- Heat-treated steel blades can be rotated to maximize cutting life
- Weighing only 27 pounds (12 kg) the unit is easily moved around the jobsite
| Rated Power | 9 A | |
| Max. Cutting Speed | 3 sec | |
| Electric Motor | 115 Volt, 60 Hz, 1Ø | |
| Notes:<%stf_notes%> | ||
| Max. Bar Size | No. 6 | |
| Max. Bar Diameter | 0.75 in | 19 mm |
| Max. Bar Size | No. 6 | |
| Max. Bar Diameter | 0.75 in | 19 mm |
| Max. Bar Size | No. 5 | |
| Max. Bar Diameter | 0.625 in | 16 mm |
| Overall Length | 15.3 in | 380 mm |
| Overall Width | 4.4 in | 110 mm |
| Overall Height | 8.8 in | 230 mm |
| Operating Weight | 27 lb | 12.2 kg |
| Shipping Weight | 37 lb | 17.7 kg |
Notice: Features and equipment specifications are subject to change without notice.
