
MQ62TDD
Multiquip has been manufacturing top quality dewatering pumps for two decades. The MQ62TDD is a solid performer for larger dewatering projects. This is the skid-mount version with a 16-gallon (60 liters) fuel cell located in the skid.
- Maximum head of 100 feet (30.5 meters).
- Diesel powered 29-hp Deutz engine.
- Pumping capacity of 1,083 gallons (4,100 liters) per min.
- Low oil shutdown.
- 16-gallon (60 liters) fuel tank.
- Running time of approximately 7 hours.
- Rugged Cast iron Pump Casing.
- 90ºElbow Discharge Port.
- Cast Iron Volute and Impeller.
- Tungsten/Carbide Seal Faces.
- Positive Seal lubrication.
Suction x Discharge |
6 x 6 in 152 x 152 mm |
|
Max. Water Capacity | 1083 gpm | 4100 lpm |
Max. Lift | 25 ft | 7.6 m |
Max. Head | 100 ft | 31 m |
Max. Pressure | 43.3 psi | 298 kPA |
Max. Solid Intake | 2 in | 51 mm |
Fuel Tank Capacity | 16 Gal | 61 L |
Notes:SKID MOUNTED |
Overall Length | 56 in | 1422 mm |
Overall Width | 36 in | 914 mm |
Overall Height | 56 in | 1422 mm |
Operating Weight | 1560 lb | 708 kg |
Options
Suction Hose - NPT Thread - Male/Female | Inside Diameter | Working Pressure | Wt. | |
HS620 | Suction Hose, 20 feet - 6" | 6" | 45 | 115 (52) |
HS625 | Suction Hose, 25 feet - 6" | 6" | 45 | 140 (64) |
Suction Hose - NPT Thread w/Quick Couplers - Male/Female | ||||
HSQ625 | Suction Hose, 25 feet - 6" Quick Coupler | 6" | 45 | 146 (67) |
Discharge Hose - NPT Thread w/ Standard Fittings | Inside Diameter | Working Pressure | Wt. | |
HD650 | Discharge Hose, 50 feet - 6" | 6" | 45 | 85 (39) |
Discharge Hose - NPT Thread with Quick Couplers | ||||
HDQ650 | Discharge Hose, 50 feet - 6" Quick Coupler | 6" | 45 | 90 (41) |
Couplers | Wt. | |||
A600A | Coupling, 6" NPT to Q-Disconnect, 6" | 1 (.04) | ||
96FA | Coupling, 6" NPT Male to Male Q-Disconnect, 6" |
Notice: Features and equipment specifications are subject to change without notice.