MRH800GS

MRH800GS

Double drum, Honda GX390, 25.6" drum
Multiquip's rugged walk-behind tandem rollers all feature advanced engineering and design satisfying the needs of the most demanding contractors.
  • Hour/tachometer measures runtime and engine rpm
  • Hydrostatic drive eliminates drive belts and adjustments
  • Infinite variable speed control gives the operator full control with forward, reverse speeds
  • External mounted vibrator assembly for easy maintenance access
  • Deadman safety control stops roller when the operator takes hands off the control levers
  • Large rubber shock mounts minimize drum vibration transfer to engine, hydraulic components
  • Guide handle folds up 90 degrees for easy transport and storage
  • Narrow profile design for less than 1 inch (25 mm) side clearance
  • Dual sprinkler controls wet drum individually
  • Single access maintenance cover for easy access to all hydraulic components
  • Permanently lubricated bearings are maintenance free
  • Built-in tie-downs on all four corners secure the roller during transport


 
 
Unit Specifications
Compaction Force 5300 lb 23.57 kN
Frequency 3300 VPM 55.3 Hz
Travel Speed 0-2 mph 0-3 kph
Water Tank Capacity 10.6 gal 40.12 L
Drum Specifications
Front Drum Width 25.6 in 650 mm
Rear Drum Width 25.6 in 650 mm
Dimensions & Weights
Overall Length 105 in 2667 mm
Overall Width 27.2 in 691 mm
Overall Height 41.7 in 1059 mm
Operating Weight 1530 lb 694 kg
Notice: Features and equipment specifications are subject to change without notice.