SDW225AT10W
This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator.
- Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
- Operates as a 6kW generator and 225-amp welder
- Powered by a 12.3-hp Kubota Z482 diesel engine
- Brushless machine with a weather-resistant housing
- Regulates voltage at 2%t
- Low noise level of only 68.7dBA
- Also available in light tower configuration as model MLTSDW7
- Full instrumentation including controls for both CC and CV
- Trailer TRLRTMP mounted
- Tier 4 Kubota diesel engine Z482
| DC Voltage | CC: 28 V | CV: 15-28 V |
| DC Current | CC: 225 A | CV: 225 A |
| Current Range | 50-225 A | |
| Max Duty Cycle w/ Full Amps Availible |
100% @200 A | |
| Welding Processes | SMAW FCAW GMAW GTAW ACAC |
|
| Fuel Tank Capacity | 6.6 gal | 30 L |
| Fuel Consumption at Rated Load |
0.6 gph | |
| AC Power Output (Single Phase) |
6 kW | |
| Cycle | 50/60 Hz | |
| Voltage | 120/240 V | |
| Amperage | 50/25 A | |
| Voltage Regulation | 2 % | |
| Receptacles | NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L14-30R 125/250V Twist-Lock 30A |
|
* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell
| Overall Length | 45 in | 114 mm |
| Overall Width | 26 in | 66 mm |
| Overall Height | 31 in | 80 mm |
| Shipping Dimensions |
46 x 26 x 36 in 116.8 x 66 x 91.44 mm |
|
| Operating Weight | 671 lb | 305 kg |
| Shipping Weight | 689 lb | 313 kg |
Notice: Features and equipment specifications are subject to change without notice.
