SDW225SSAWR
This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator. Remote control allows the operator to adjust amperage from up to 100 feet (30.5 meters) from the machine.
- Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
- Operates as a 6kW generator and 225-amp welder
- Powered by a 12.3-hp Kubota Z482 diesel engine
- Brushless machine with a weather-resistant housing
- Regulates voltage at 2%
- Low noise level-produces only 68.7 dBA
- Also available in light tower configuration as model MLTSDW7
- Full instrumentation including controls for both CC and CV
- Remote control allows operator to work 100 feet (30.5 meters) from the welder
- Tier 4 Kubota diesel engine Z482
| DC Voltage | CC: 28 V | CV: 15-28 V |
| DC Current | CC: 225 A | CV: 225 A |
| Current Range | 50-225 A | |
| Max Duty Cycle w/ Full Amps Availible |
100% @200 A | |
| Welding Processes | SMAW FCAW GMAW GTAW ACAC |
|
| Fuel Tank Capacity | 6.6 gal | 30 L |
| Fuel Consumption at Rated Load |
0.6 gph | |
| AC Power Output (Single Phase) |
6 kW | |
| Cycle | 50/60 Hz | |
| Voltage | 120/240 V | |
| Amperage | 50/25 A | |
| Voltage Regulation | 2 % | |
| Receptacles | NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L14-30R 125/250V Twist-Lock 30A |
|
* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell
| Overall Length | 45 in | 114 mm |
| Overall Width | 26 in | 66 mm |
| Overall Height | 31 in | 80 mm |
| Shipping Dimensions |
46 x 26 x 36 in 116.8 x 66 x 91.44 mm |
|
| Operating Weight | 671 lb | 305 kg |
| Shipping Weight | 689 lb | 313 kg |
Notice: Features and equipment specifications are subject to change without notice.
