ST6125G

ST6125G

6 Inch Discharge, 230/460 3Ø, 15 HP, 709GPM, 112ft Total Head
This submersible centrifugal pump is a heavy-duty performance minded product for moving water in multiple confined and open area applications. This is a very powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, and Municipalities. Further, the ST6125G incorporates a rugged industrial cast iron housing, dual shaft seals, sealed ball bearings impeller, and molded 50’ Power Cable with strain relief. This type of pump requires a Control Box to provide safe operations and safety shutdowns such as thermal & voltage overload protection. Further, the Control Box would permit float switch (if required) connections.

  • 15.0HP, 230/460V, 3Ø 60 Hz.
  • Running AMPS - 35A (230V) / 18A (460V).
  • Field changeable voltage (motor J-box).
  • 6” Discharge Port.
  • Reliable double mechanical oil-filled seals.
  • Easy Impeller Clean-out.
  • Suction Cover - Ductile Iron (450).
  • Suction Strainer – Stainless Steel (304).
  • Cast iron/steel motor casing serves as heat conductor.
  • Pumps Liquid Up To 104° F – pH 4-10.
  • 50’ of molded power cord w/strain relief.

  • Dewaters Flat Surfaces Up To 1/2” Levels.
  • MAX installation depth – 82’ (25m)
 
 
Unit Specifications
Impeller Type Cast-Ductile-Iron
Impeller Disc Size 6 in 150 mm
Total Head 125 ft 38 m
Water Capacity 610 gpm 2309 lpm
Dimensions & Weights
Pump Diameter 14.5 in 368 mm
Overall Height 38.8 in 986 mm
Operating Weight 390 lb 177 kg
Electrical Specifications
Power 15 HP 11 kW
Phase Three
Voltage 230/460 V
Starting Amperage 0 A
Running Amperage 0 A
Cable Length 50 ft 15.2 m
Notice: Features and equipment specifications are subject to change without notice.