Asphalt

Diamond Blades

Multiquip's Sanders line of products covers the entire spectrum of diamond tools, producing world-class tools and equipment to facilitate the requirements of an ever growing industry.

Series	Relative Diamond Content
9,000
8,000
7,000

Because of the abrasive nature of asphalt, all asphalt blades are supplied, at not extra cost, with under cut protection to improve blade life.

Based on our expert experience with the listed aggregates, we recommend the following specification and series:

Aggregate Type		Recommended Specification
Critically Hard		AS8009
Hard		AS8208
Medium-Hard		AS8508
Medium-Soft		AS8707
Soft		AS8907

Standard Blade Sizes
Dia. x Width
in	mm	in	mm
14 x 0.125	356 x 3.2	20 x 0.155	508 x 3.9
14 x 0.140	356 x 3.6	20 x 0.165	508 x 4.2
14 x 0.155	356 x 3.9	20 x 0.187	508 x 4.7
14 x 0.165	356 x 4.2	20 x 0.220	508 x 5.6
14 x 0.187	356 x 4.7	20 x 0.250	508 x 6.4
14 x 0.220	356 x 5.6	24 x 0.155	610 x 3.9
14 x 0.250	356 x 6.4	24 x 0.165	610 x 4.2
14 x 0.375	356 x 9.5	24 x 0.187	610 x 4.7
16 x 0.140	406 x 3.6	24 x 0.220	610 x 5.6
16 x 0.155	406 x 3.9	24 x 0.250	610 x 6.4
16 x 0.165	406 x 4.2	26 x 0.155	660 x 3.9
16 x 0.187	406 x 4.7	26 x 0.165	660 x 4.2
16 x 0.220	406 x 5.6	26 x 0.187	660 x 4.7
16 x 0.250	406 x 6.4	26 x 0.220	660 x 5.6
18 x 0.140	457 x 3.6	26 x 0.250	660 x 6.4
18 x 0.155	457 x 3.9	30 x 0.187	762 x 4.7
18 x 0.165	457 x 4.2	30 x 0.220	762 x 5.6
18 x 0.187	457 x 4.7	30 x 0.250	762 x 6.4
18 x 0.220	457 x 5.6	36 x 0.187	914 x 4.7
18 x 0.250	457 x 6.4	36 x 0.220	914 x 5.6
20 x 0.140	508 x 3.6	36 x 0.250	914 x 6.4

Blade Segment Height
in	mm
.350 and .400	9 and 10

Notice: Features and equipment specifications are subject to change without notice.