Bridge Deck

Diamond Blades

Multiquip's Sanders line of products covers the entire spectrum of diamond tools, producing world-class tools and equipment to facilitate the requirements of an ever growing industry.

Series	Relative Diamond Content
11,000
10,000
9,000
8,000
7,000

Bridge Deck restoration is a high priority requirement with the interstate highway system, where cost savings are important. Sanders Saws technical support team can help select the best blades for Bridge Deck sawing requirements.

Based on our expert experience with the listed aggregates, we recommend the following specification and series:

Aggregate Type		Recommended Specification
Critically Hard		BD3511
Hard		BD4508
Medium-Hard		BD5509
Medium-Soft		BD6009
Soft		BD6509

Standard Blade Sizes
Dia. x Width
in	mm	in	mm
14 x 0.125	356 x 3.2	24 x 0.155	610 x 3.9
14 x 0.140	356 x 3.6	24 x 0.165	610 x 4.2
14 x 0.155	356 x 3.9	24 x 0.187	610 x 4.7
14 x 0.165	356 x 4.2	24 x 0.220	610 x 5.6
14 x 0.187	356 x 4.7	24 x 0.250	610 x 6.4
14 x 0.220	356 x 5.6	26 x 0.155	660 x 3.9
14 x 0.250	356 x 6.4	26 x 0.165	660 x 4.2
14 x 0.375	356 x 9.5	26 x 0.187	660 x 4.7
16 x 0.125	406 x 3.2	26 x 0.220	660 x 5.6
16 x 0.140	406 x 3.6	26 x 0.250	660 x 6.4
16 x 0.155	406 x 3.9	30 x 0.165	762 x 4.2
16 x 0.165	406 x 4.2	30 x 0.187	762 x 4.7
16 x 0.187	406 x 4.7	30 x 0.220	762 x 5.6
16 x 0.220	406 x 5.6	30 x 0.250	762 x 6.4
16 x 0.250	406 x 6.4	32 x 0.187	813 x 4.7
18 x 0.125	457 x 3.2	32 x 0.250	813 x 6.4
18 x 0.140	457 x 3.6	36 x 0.165	914 x 4.2
18 x 0.155	457 x 3.9	36 x 0.187	914 x 4.7
18 x 0.165	457 x 4.2	36 x 0.220	914 x 5.6
18 x 0.187	457 x 4.7	36 x 0.250	914 x 6.4
18 x 0.220	457 x 5.6	40 x 0.187	1016 x 4.7
18 x 0.250	457 x 6.4	40 x 0.220	1016 x 5.6
20 x 0.125	508 x 3.2	40 x 0.250	1016 x 6.4
20 x 0.140	508 x 3.6	42 x 0.187	1067 x 4.7
20 x 0.155	508 x 3.9	42 x 0.220	1067 x 5.6
20 x 0.165	508 x 4.2	42 x 0.250	1067 x 6.4
20 x 0.187	508 x 4.7	48 x 0.187	1219 x 4.7
20 x 0.220	508 x 5.6	48 x 0.220	1219 x 5.6
20 x 0.250	508 x 6.4	48 x 0.250	1219 x 6.4

Blade Segment Height
in	mm
.450 and .500	11.4 and 12.7

Notice: Features and equipment specifications are subject to change without notice.