Grinding Blades
For the past 30 years, Grooving & Grinding machine manufacturers have relied on Sanders blades. Runway and bridge deck grooving has been accepted as standard procedure in most locations by the FAA and DOT's, and is a safe means of reducing accidents. This long lasting, cost effective highway rehabilitation method is enhanced by the latest grinding and grooving machines on the market today.
| Series | Relative Diamond Content |
|---|---|
| 10,000 |
 
|
| 9,000 |
|
| 8,000 |
|
| 7,000 |
|
Sanders Saws grinding blades have performed at the highest of industry standards worldwide. Diamond grinding is cost effective and as an extra benefit improves skid resistance, enhances tire traction, and provides drainage which reduces the possiblity of hydroplaning and noise caused by tire to pavement contact. Call to discuss machine type, application and location for correct diamond blade selection.
Arbors sizes can vary from 1 3/4", 3", 5", 6" & 8" and with custom sizing available on shop built grinders. Common applications are new and rehabilitated concrete, asphalt highways, bump grinding, airport runways, racetracks, and more!
Cured Concrete
| Aggregate Type | Recommended Specification | |
|---|---|---|
| Critically Hard | GR7007 | |
| Hard | GR7207 | |
| Medium-Hard | GR7408 | |
| Medium-Soft | GR7609 | |
| Soft | GR7810 | |
Asphalt
| Aggregate Type | Recommended Specification | |
|---|---|---|
| Critically Hard | GR7507 | |
| Hard | GR7707 | |
| Medium-Hard | GR7908 | |
| Medium-Soft | GR8209 | |
| Soft | GR8510 | |
| Dia. x Width | ||||
|---|---|---|---|---|
| in | mm | in | mm | |
| 12 x 0.125 | 305 x 3.2 | 12 x 0.250 | 305 x 6.35 | |
| 14 x 0.125 | 356 x 3.2 | 14 x 0.250 | 356 x 6.35 | |
| 16 x 0.125 | 406 x 3.2 | 16 x 0.250 | 406 x 6.35 | |
| 18 x 0.125 | 457 x 3.2 | 18 x 0.250 | 457 x 6.35 | |
Specify Head width and Arbor diameter - All common arbors available
Notice: Features and equipment specifications are subject to change without notice.
