Grooving Blades
For the past 30 years, Grooving & Grinding machine manufacturers have relied on Sanders blades. Runway and bridge deck grooving has been accepted as standard procedure in most locations by the FAA and DOT's, and is a safe means of reducing accidents. This long lasting, cost effective highway rehabilitation method is enhanced by the latest grinding and grooving machines on the market today.
| Series | Relative Diamond Content |
|---|---|
| 10,000 |
 
|
| 9,000 |
|
| 8,000 |
|
| 7,000 |
|
Sanders grooving blades have exceeded expectation in various applications. Important to note is that there are several types of grooving machines that range in power from 15hp.electric to 350hp diesel engines and arbor sizes varying from 1 3/4" to 2",5",6" up to 8". Common applications are airport runways, bridge deck, and cattle pens. Call to discuss machine type being used and material being grooved for best results.
Cured Concrete
| Aggregate Type | Recommended Specification | |
|---|---|---|
| Critically Hard | GV7007 | |
| Hard | GV7207 | |
| Medium-Hard | GV7408 | |
| Medium-Soft | GV7609 | |
| Soft | GV7810 | |
Asphalt
| Aggregate Type | Recommended Specification | |
|---|---|---|
| Critically Hard | GV7507 | |
| Hard | GV7707 | |
| Medium-Hard | GV7908 | |
| Medium-Soft | GV8209 | |
| Soft | GV8510 | |
| Dia. x Width | ||||
|---|---|---|---|---|
| in | mm | in | mm | |
| 12 x 0.110 | 305 x 2.8 | 14 x 0.125 | 356 x 3.2 | |
| 12 x 0.125 | 305 x 3.2 | 14 x 0.230 | 356 x 5.8 | |
| 12 x 0.230 | 305 x 5.8 | 14 x 0.250 | 356 x 6.4 | |
| 12 x 0.250 | 305 x 6.4 | |||
Specify Head width and Arbor diameter - All common arbors available
Notice: Features and equipment specifications are subject to change without notice.
