Joint Widening
Multiquip's Sanders line of products covers the entire spectrum of diamond tools, producing world-class tools and equipment to facilitate the requirements of an ever growing industry.
| Series | Relative Diamond Content |
|---|---|
| 11,000 |
|
| 10,000 |
|
| 9,000 |
|
Joint Widening is generally done two to three days after the initial green joint has been cut to facilitate the installation of a neoprene, hot pour or silicone sealant. As with the green blades, blade selection is very important and the 11,000 series covers most aggregates. Always use the correct thickness spacers when pairing blades.
** Periodically alternating blades maintains even wear for longer life.
Based on our expert experience with the listed aggregates, we recommend the following specification and series:
| Aggregate Type | Recommended Specification | |
|---|---|---|
| Critically Hard | JW7211 | |
| Hard | JW7210 | |
| Medium-Hard | JW7210 | |
| Medium-Soft | JW7209 | |
| Soft | JW7211; JW7209 | |
| Dia. x Width | ||||
|---|---|---|---|---|
| in | mm | in | mm | |
| 12 x 0.125 | 305 x 3.2 | 14 x 0.375 | 356 x 9.5 | |
| 12 x 0.187 | 305 x 4.7 | 16 x 0.187 | 406 x 4.7 | |
| 12 x 0.220 | 305 x 5.6 | 16 x 0.220 | 406 x 5.6 | |
| 12 x 0.250 | 305 x 6.4 | 18 x 0.187 | 457 x 4.7 | |
| 12 x 0.375 | 305 x 9.5 | 18 x 0.220 | 457 x 5.6 | |
| 14 x 0.125 | 356 x 3.2 | 18 x 0.250 | 457 x 6.4 | |
| 14 x 0.187 | 356 x 4.7 | 20 x 0.187 | 508 x 4.7 | |
| 14 x 0.220 | 356 x 5.6 | 20 x 0.220 | 508 x 5.6 | |
| 14 x 0.250 | 356 x 6.4 | 20 x 0.250 | 508 x 6.4 | |
| in | mm |
|---|---|
| .350 | 9 |
Notice: Features and equipment specifications are subject to change without notice.
