LS500

LS500

50yd/hr, Deutz BF4L2011F 79hp Turbo Diesel
The "Workhorse" for most hard-rock applications
  • Concrete piston face pressure of 1100 PSI (76 Bar)
  • Concrete cylinder diameter is 6 inches (152 mm) with 36-inch stroke (914 mm)
  • Horizonal pumping distance of 1000 feet (300 meters), vertical is 300 feet (91 meters) 
  • Powered by a 79-hp (58.9kW) Deutz BF4L2011 turbo diesel
  • Designed for aggregate sized up to 1-1/2 inches (38 mm)
  • Hopper remixer/agitator standard
  • True Reverse allows stroke change during any point in the pumping cycle
  • Hard faced wear components for longer life 
  • Variable volume output (from the control panel) from 0-to-50 cubic yards (38 cubic meters) per hour
  • Ideal for use with shotcrete, masonry block fill, slabs, footings, basements, & compaction grouting 
  • Innovative DCP (Digital Control Panel) solid state electronic control box with full diagnostic & performance monitoring
  • Optional wireless radio remote has a range of 1000 feet (300 meters)
  • Optional rear hydraulic outriggers
  • Optional air or electric vibrators for hopper screen


 
 
Unit Specifications
Hopper Height 43 in 1092 mm
Hopper Capacity 10 ft 0.283 L
Pump Outlet 0.5 in 127 mm
Concrete Cylinders 6 x 36 in 152 x 914 mm
Hydraulic Cylinders 3 x 36 in 76 x 914 mm
Hydraulic Oil Capacity 58 gal 219 L
Fuel Tank Capacity 40 gal 151 L
Brake Type Hydraulic Surge
Pumping Specifications
Pumping Rate
per Hour
0-50 yd 0-38 m
Vertical Pumping Height 300 ft 91 m
Horizontal Pumping Distance 1000 ft 305 m
Max. Concrete Pressure 11000 psi 76 bar
Max. Aggregate Size 1.5 in 38 mm
Note: These figures will vary due to concrete mix design, line size, and job site conditions.
Dimensions & Weights
Overall Length 173 in 4394 mm
Overall Width 68 in 1727 mm
Overall Height 70 in 1778 mm
Operating Weight 4870 lb 2214 kg
Notice: Features and equipment specifications are subject to change without notice.