MB25A
This compact rebar bender is ideal for both high-production workshops or job sites.
- Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
- Angle adjustment knob allows fine tuning of bending angle
- Standard foot switch allows you to bend rebar while freeing your hands for material handling.
- Driven by a 115-Volt, single-phase electric motor
- A complete set of rollers and collars is included to quickly change your bending radius.
- Two built-in lifting handles are provided for easy movement around the job site.
| Max. Rebar Diameter | 1 in | 25.4 mm |
| Bending Range | 0 to 180 | |
| Max. Bending Speed | 180° - Approx. 5 sec | |
| Electric Motor | 115V, 60 Hz, 1Ø, AC | |
| No. 3 Rebar | Diameter | 3/8 in | 9.5 mm |
| Radius | 2.25 in | 57 mm | |
| No. 4 Rebar | Diameter | 1/2 in | 13 mm |
| Radius | 3 in | 76 mm | |
| No. 5 Rebar | Diameter | 5/8 in | 15.9 mm |
| Radius | 3.75 in | 95 mm | |
| No. 6 Rebar | Diameter | 3/4 in | 19 mm |
| Radius | 4.5 in | 114 mm | |
| No. 7 Rebar | Diameter | 7/8 in | 22.2 mm |
| Radius | 5.25 in | 133 mm | |
| No. 8 Rebar | Diameter | 1 in | 25.4 mm |
| Radius | 6 in | 152.4 mm |
| Standard Accessories | Foot Switch Rollers (5 sizes) Collars (6 sizes) Tool Kit Waterproof Cover |
|
| Overall Length | 17 in | 432 mm |
| Overall Width | 17 in | 432 mm |
| Overall Height | 17 in | 432 mm |
| Operating Weight | 227 lb | 103 kg |
| Shipping Weight | 331 lb | 150 kg |
Notice: Features and equipment specifications are subject to change without notice.
