MD80
The newest addition to our family of hydrostatic riders is engineered to deliver superior performance and hassle-free operation. A powerful 40 HP Vanguard engine provides the torque you need for panning and twin six-blade rotors take you through to the final finish.
Drive System
- 40 HP EFI Vanguardengine complies with US EPA Tier 4 Final emission requirements
- Patented Engine Power Managementsenses engine load and adjusts hydraulic pumpstroke to allow the engine to operate at peak performance
- Six blade spider assembliesassure the flattest floors possible with 33% more blade contact
Operator Controls
- Cruise controlenables the operator to precisely set rotor speedsto maintain consistent rotor speeds under varying load conditions
- Ergonomic controlsenhance productivity and reduceoperator fatigue
- 6 LED lightsprovide state of the art illumination for night time or indoor work
- Retardant spray system isactuated by control buttonslocated on the steering control handles
- Proportional hydraulic steeringhas been enhanced and offers improved responsiveness with minimal operator effort
- Multifunction displayprovides theoperator with easy-to-read data including engine speed, fuel levels and alerts
- Drink holderfor operator convenience
Design
- Electric linear actuator controls pitch for precision blade angle
- Improved stability-engine placement lowers overall center of gravity and reduces frame roll
- Rebuildable spider assemblies reducemaintenance costs
- Non-overlapping design allows the versatilityof using blades or pans on the job site
- Standard 46"pans and blade accessories are available
Meet the MD80: The 8-Foot Do-it-All Workhorse
Introducing the MD80, the do-it-all workhorse of Multiquip’s all-new MD-Series. With its 8-foot platform, the MD80 is engineered for versatility, control, and top-tier performance on every slab. Join Jordan Carmean, Product Manager - Concrete, as he breaks down the MD80’s key features and explains why it’s the ultimate choice for contractors who need a trowel that works as hard as they do.
Watch VideoEngine | 40 HP Vanguard EFI Air Cooled | |
Rotor RPM | 10-160 | |
Path Width | 95 in | 2438 mm |
Fuel Tank Capacity | 8 gal | 30 L |
Run Time | 2.5 gal/hr |
Overall Length | 51 in | 1549 mm |
Overall Width | 100 in | 2450 mm |
Overall Height | 64 in | 1625 mm |
Operating Weight | 1,564 lb | 709.4 kg |
Shipping Weight | 1941 lb | 861 kg |
Recommended Blades for 8' HYD ROT's
-
C10816 BLADE COMBO ENDURO 8 x 16 48 6-BLADE ROT -
C8160 BLADE COMBO REV 8 X 16 48 6BLD ROT -
F10616 BLADE FINISH ENDURO 6 x 16 48 6BLD ROT -
F616 BLADE FINISH 6 x 16 48 6BLD ROT -
RC816 BLADE COMBO REV ENDURO 8 x16 48 6BL ROT
Poly Blades
-
F616PL BLADE FINISH POLY 6 X 16 46 6BLD ROT
Recommended Float Pans for 8' HYD ROT's
-
32608W PAN FLOAT 46 6 BLADE SF ROT -
32608WZ PAN FLOAT 46 6 BLADE SF Z-CLIP ROT -
32690WZ PAN FLOAT 46 6 BLADE FLAT Z-CLIP ROT -
20646 PAN FLOAT LATCH PIN
Optional Wheel Kits |