YELLSUB
The Little Sub is MQ’s most lightweight, compact submersible pump. It is a great choice for common household moving water applications such as: flooded rooms, flat roofs, fill tanks, basins, fountains and waterfalls. One piece polymer pump casing body resists corrosion and heat. The YELLSUB incorporates internal thermal overload protection, dual shaft seals, and positive direct drive thermoplastic impeller secured with stainless steel fittings.
- .25HP, 115V/2.5A, 1Ø, UL & CUL Listed Electric Motor.
- Built-in Overload Protection.
- 1 1/4” (NPT) Male Discharge w/1 ¼” Female Adapter and Thermoplastic Garden Hose Adapter.
- Total Head: 15 ft.
-
- Pumps Liquid Up To 120° F.
- Dewaters Surfaces Up To 1/8” Levels.
- Rated for 4,500 Hours of Intermittent Duty.
Impeller Type | Poly | |
Impeller Disc Size | 4 in | 102 mm |
Total Head | 15 ft | 4.6 m |
Water Capacity | 33 gpm | 125 lpm |
Max. Solid Intake | .4 in | 10 mm |
Power | 0.25 HP | 0.185 kW |
Phase | Single | |
Voltage | 115 V | |
Starting Amperage | 10 A | |
Running Amperage | 2.5 A | |
Cable Length | 9 ft | 2.7 m |
Pump Diameter | 6.25 in | 159 mm |
Overall Height | 9.5 in | 241 mm |
Operating Weight | 6 lb | 2.72 kg |
The Little Sub is MQ’s most lightweight, compact submersible pump. It is a great choice for common household moving water applications such as: flooded rooms, flat roofs, fill tanks, fountains and waterfalls. One piece polymer pump casing body resists corrosion and heat.
The Little Sub incorporates internal thermal overload protection, dual shaft seals, and positive direct drive thermoplastic impeller secured with stainless steel fittings.
Multiquip provides the following support Accessories for the Little Sub:
Float Switch ~ SW1A
Mechanically activated, wide-angle design single ON/OFF float switch that is not sensitive to rotation or turbulence. A 120V “piggy-back” plug provides convenient operational set-up. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.
SW1A Features
- 120/230V 50/60Hz Single Phase
- Rated for 13A running and 85A start-up.
- Adjustable activation range 6” to 18”.
- High impact PVC, corrosion resistant float housing.
- Operates up to 140° F.
- Heavy duty electrical contacts.
- UL/CSA Certified.
- Passed NSF Standard 61 Protocol.
- 16 gauge, 2-conductor water resistant cable - 20’ cord length.
- Includes standard mounting cable & pipe clamps.
Control Box ~ CB3
|
120V 50/60 Hz Single Phase Controller w/two mechanically activated wide angle ON/OFF float switches (SW1WOPA). This box is selected if the operations call for a manual ON/OFF/AUTO Switch. Housing manufactured from polyester reinforced fiberglass, water resistant, UL/CSA Certified. Use with any 115V or 120V model submersible pump. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.