PRO12

PRO12

12cf Mortar, Honda GX390

For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.

  • Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
  • Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
  • Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
  • Adjustable height - discharge height 24" ~ 42.5".
  • Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
  • Extended run times - up to 8 hours – with 5-gallon fuel tank.
  • Costly waste is reduced by a spill plate that directs excess material into the tub.
  • Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
  • Convenient access forklift pockets from any side of the mixer.
  • Drive and dump controls easily accessible and located above the engine cowling.
  • Greasable paddle shaft seal provides long service life.


 
 
Unit Specifications
Capacity 12 ft³ 340 L
Bags 3-4
Max. Aggregate Size 1 in 25.4 mm
Adjustable Drum Discharge Height Up to 42.5 inches
Drive System Hydraulic
Dump Action Hydraulic
Dimensions & Weights
Overall Length 73.5 in 1917.7 mm
Overall Width 35.0 in 889 mm
Overall Height 45.0 in 1143 mm
Operating Weight 1580 lb 716.68 kg
Notice: Features and equipment specifications are subject to change without notice.