
J36E2
The Whiteman J-Series J36E2 electric trowel is capable of meeting all your finishing requirements from pan floating to high-speed finishing. Powered by a 2.0 HP electric motor it is ideal for enclosed areas such as laboratories, food processing plants and areas where exhaust fumes or noise are not permitted.
A manually adjustable clutch allows rotor speed to be adjusted between 30 – 160 RPM. This provides optimum torque for panning and the high speed necessary for burnishing.
Note: The J36E2 requires a startup current of 34.74 Amps, and must have a power source capable of supplying this starting current. The continuous current requirement during run is 9.1 Amps.”
- Electric motor is ideal for enclosed areas where exhaust fumes or noise is not permitted
- Adjustable Variable Speed Clutch
- Includes standard-pitch handle with electrical control box
- 36-inch (91.5 cm) ring diameter
Clutch Type | Adjustable Variable Speed Clutch | |
No. of Blades | 4 | |
Ring Diameter | 36 in | 914 mm |
Rotor Speed | 30-160 RPM | |
Handle Options | Includes Standard Pitch Electric Handle |
Overall Length | 70 in | 1789 mm |
Overall Width | 36 in | 915 mm |
Overall Height | 41 in | 1044 mm |
Operating Weight | 166 lb | 75 kg |
Shipping Weight | 191 lb | 86 kg |
Recommended Blades for 36" J series WBT's
- C844 BLADE COMBO 8 x 14 36 TROWEL
-
C844L BLADE COMBO LIGHT 8 x 14 36 TROWEL -
F900 BLADE FINISH 6 x 14 36 TROWEL -
RC814 BLADE COMBO REV 8 x 14 6 ROT WBT -
CL954F BLADE FLOAT 10 x 14 36 TROWEL -
QC1871 BLADE COMBO 8 x 14 QC 36 TROWEL -
QF1872 BLADE FINISH QC 6 x 14 36 TROWEL -
QF10872 BLADE FINISH ENDURO QC 6 x 14 36 TROWEL -
QC10871 BLADE COMBO ENDURO QC 8 x 14 36 TROWEL
Quick Change Mounting Bar/Snap for QC Blades
-
QB1857 BAR MOUNTING QC BLADE 36 TROWEL -
QS1869 BLADE SNAP PIN FOR QC BLADE(2 PER BLADE)
Poly Blades
-
F900PL BLADE FINISH POLY 6 X 14 36 TROWEL
Recommended Float Pans for 36" J series WBT's
-
2870 PAN FLOAT 36 4 BLADE FLAT WBT