HTX6H
The HTX series 8-foot hydraulic trowel features innovative technology, operator comfort and ease of operation that contractors expect from the industry leader.
Drive System
- 70HP Hatz 4H50TIC turbo diesel engine complies with US EPA Tier 4 Final emission requirements
- Engine comes complete with a DOC exhaust system standard that meets all EPA requirements. Any modifications to this system will void engine warranty
- Patented Engine Power Management senses engine load and adjusts hydraulic pump stroke to allow the engine to operate at peak performance
- Six blade spider assemblies assure the flattest floors possible with 33% more blade contact
Operator Controls
- Cruise control reduces operator fatigue during low speed operations
- 6 LED lights provide state of the art illumination for night time or indoor work
- Retardant spray system actuated by the controls located on the steering handles, provides uniform coverage of the slab surface
- Proportional hydraulic steering has been enhanced and offers improved responsiveness with minimal operator effort
- SmartPitchâ„¢ control synchronizes blade pitch for both rotors with single button
- Multifunction display provides the operator with easy-to-read data including engine speed, fuel levels and alerts
- Rotor Jog facilitates lifting; allows operator to jog the rotors to prevent surface marring while standing in front of the machine
- 12 Volt outlet and drink holder for charging your electronic devices and operator convenience
Design
- Clamshell deign simplifies maintenance and permits convenient access to all service items
- Automatic Shut-down stops the rotors from turning if the operator stands up while the engine is running
- Increased chassis rigidity and stability achieved by lower center of gravity, reduces body roll and improves steering feedback and operator control
Engine | Hatz 4H50TIC turbo diesel engine | |
Engine Cooling | Liquid | |
Blades per Rotor | 6 | |
Rotor RPM | 10-160 RPM | |
Path Width | 92 in | 2336 mm |
Fuel Tank Capacity | 10 gal | 37.8 L |
Run Time | 3.2 gal/hr |
Overall Length | 48 in | 1219 mm |
Overall Width | 95 in | 2413 mm |
Overall Height | 59 in | 1498 mm |
Operating Weight | 2496 lb | 1132 kg |
Shipping Weight | 2845 lb | 1290.4 kg |
Recommended Blades for 8' HYD ROT's
-
C10816 BLADE COMBO ENDURO 8 x 16 48 6-BLADE ROT -
C8160 BLADE COMBO REV 8 X 16 48 6BLD ROT -
F10616 BLADE FINISH ENDURO 6 x 16 48 6BLD ROT -
F616 BLADE FINISH 6 x 16 48 6BLD ROT -
RC816 BLADE COMBO REV ENDURO 8 x16 48 6BL ROT
Poly Blades
-
F616PL BLADE FINISH POLY 6 X 16 46 6BLD ROT
Recommended Float Pans for 8' HYD ROT's
-
32608W PAN FLOAT 46 6 BLADE SF ROT -
32608WZ PAN FLOAT 46 6 BLADE SF Z-CLIP ROT -
32690WZ PAN FLOAT 46 6 BLADE FLAT Z-CLIP ROT -
20646 PAN FLOAT LATCH PIN
Optional Wheel Kits |
Notice: Features and equipment specifications are subject to change without notice.